AEG BCE742220B Manual do utilizador - Página 5

Procurar online ou descarregar pdf Manual do utilizador para Forno AEG BCE742220B. AEG BCE742220B 48 páginas.

AEG BCE742220B Manual do utilizador
Height of the back of
the appliance
Width of the front of
the appliance
Width of the back of
the appliance
Depth of the appli-
ance
Built in depth of the
appliance
Depth with open
door
Ventilation opening
minimum size. Open-
ing placed on the
bottom rear side
Mains supply cable
length. Cable is
placed in the right
corner of the back
side
Mounting screws
2.2 Electrical connection
WARNING!
Risk of fire and electric
shock.
• All electrical connections should be
made by a qualified electrician.
• The appliance must be earthed.
• Make sure that the parameters on the
rating plate are compatible with the
electrical ratings of the mains power
supply.
• Always use a correctly installed
shockproof socket.
• Do not use multi-plug adapters and
extension cables.
• Make sure not to cause damage to
the mains plug and to the mains
cable. Should the mains cable need
to be replaced, this must be carried
out by our Authorised Service Centre.
• Do not let mains cables touch or
come near the appliance door or the
576 mm
• The shock protection of live and
549 mm
• Connect the mains plug to the mains
548 mm
567 mm
• If the mains socket is loose, do not
546 mm
• Do not pull the mains cable to
1017 mm
• Use only correct isolation devices: line
550 x 20 mm
• The electrical installation must have
1500 mm
• This appliance is supplied with a main
4 x 12 mm
2.3 Use
• This appliance is for household use
• Do not change the specification of
• Make sure that the ventilation
• Do not let the appliance stay
• Deactivate the appliance after each
• Be careful when you open the
• Do not operate the appliance with
• Do not apply pressure on the open
• Do not use the appliance as a work
niche below the appliance, especially
when it operates or the door is hot.
insulated parts must be fastened in
such a way that it cannot be removed
without tools.
socket only at the end of the
installation. Make sure that there is
access to the mains plug after the
installation.
connect the mains plug.
disconnect the appliance. Always pull
the mains plug.
protecting cut-outs, fuses (screw type
fuses removed from the holder), earth
leakage trips and contactors.
an isolation device which lets you
disconnect the appliance from the
mains at all poles. The isolation
device must have a contact opening
width of minimum 3 mm.
plug and a main cable.
WARNING!
Risk of injury, burns and
electric shock or explosion.
only.
this appliance.
openings are not blocked.
unattended during operation.
use.
appliance door while the appliance is
in operation. Hot air can release.
wet hands or when it has contact with
water.
door.
surface or as a storage surface.
ENGLISH
5