Alinco DR-135T MkII Manual rápido - Página 3

Procurar online ou descarregar pdf Manual rápido para Rádio Alinco DR-135T MkII. Alinco DR-135T MkII 3 páginas.
Também para Alinco DR-135T MkII: Manual rápido (2 páginas)

Imprimir página

Basic VFO Mode for Simplex Operation

Note that VFO Mode is the default mode upon power-up of the radio.

For Simplex operation, the only information required is the desired Simplex Frequency. If you have this

information, you may program the radio in VFO mode as follows:

1. Verify the radio is in VFO mode by checking that the memory mode M icon and Channel

Number are not visible on the left side of the display.

If the radio is in Memory Mode, press and release the V/M key (5) until the M and

Channel Number disappear from the display. It may take several presses of the key to

get into VFO mode.

2. Rotate the main Dial (3) clockwise to increase the frequency, counterclockwise to decrease the

frequency. Continue rotating the Dial (3) until you get to the desired simplex frequency.

3. Set the radio for Simplex Operation:

Press and release the Function key (4). You should see an F icon in the display.

b. Press and release the MHz/Shift key (6). The display will show the offset frequency and

direction; the default is –0.600MHz, as shown below:

Offset Direction

(Negative)

To change the offset direction (from the default setting of negative "-" to simplex), press

the MHz/Shift key (6) repeatedly until the display shows no offset icon (there should be

no "-" or "+" in the display).

d. Once the Offset Direction icon does not appear in the display, press and release the

Squelch key (9) to save the setting in VFO mode. The display will return to the

frequency.

4. The transmit Power Level may be set to Low, Medium, or High as follows:

Press and release the FUNC key (4).

b. Press the Power Level/CALL key (8) to change the power level; each time you press the

Power Level/CALL key (8) a different setting will appear. Lo will appear in the display

for Low Power; Mi will appear for MID power; and no power indication icon will

indicate High power.

Press and release the FUNC key (4) to save the Power Level setting.

5. The radio is now programmed in VFO mode to use the desired simplex frequency. To transmit

press and hold the Push to Talk button (11) on the Microphone (10). Release the Push to Talk

button to receive.

Offset

Frequency