Alirac ECL-160 Manual de operação - Página 11

Procurar online ou descarregar pdf Manual de operação para Sistema de soldadura Alirac ECL-160. Alirac ECL-160 16 páginas.

NOTES: When the welder works for a long time, the high temperature indicator

will light. This means the inside temperature has exceeded its standard. And you

must turn off the power immediately for a period until it recovers.

* You have to wear canvas overalls and face mask to prevent from arc light and heat

radiation.

* Vibration screen should be laid out to prevent others from arc light.

* Inflammable and explosive stuffs are not allowed to pile up. All the connections

must be right, reliable.

5.1 Procedure

Connect to the power switch digital ammeter

To adjust the current potentiometer to the required value of the welding.

Pick up electrode holder, and point at the welding edge. Then put the electrode on

the workpiece, you can start welding.

When the electrode is left only 2~3cm away from the holder, you have to replace new

one to go on working.

NOTES: When

the electrodes combustion is in process at high heat, do not touch

it with bare hands while replacing it. Besides, the electrode head down should be

unified in a metal container. And the cover coating should not be caught by the

holder. Scratch gently when igniting the arc, otherwise it is easy to come across

the phenomenon of sticking electrode.

After finishing work, you should remove the slag with specific knock residue tools in

the way of knocking.

lights on.