Garmin TACX NEO BIKE PLUS Manual do Proprietário - Página 25
Procurar online ou descarregar pdf Manual do Proprietário para GPS Garmin TACX NEO BIKE PLUS. Garmin TACX NEO BIKE PLUS 34 páginas.
Imprimir página
4 Press either button to select a mode.
The active mode icon blinks for 1 second to confirm your choice.
5 During your ride, select an option:
• Press
to increase the incline, value, or resistance.
• Press
to decrease the incline, value, or resistance.
6 If necessary, squeeze the brakes to slowly come to a stop.
TIP: If you rest or pause your training, you can also use the brakes to slow down the flywheel.
Training Modes
You can choose a training mode when you are doing a manual (stand alone) workout on your Tacx NEO
Bike Plus trainer. Training modes are not available if you are connected to the Tacx Training app or another
third-party app.
NOTE: Training modes function with or without external power connected. Training will feel more realistic with
external power connected.
Symbol Mode
Description
Training is based on a fixed incline so you can simulate gradients and hills. You can use
Slope
the control buttons to set the incline and use the shifters to change gears.
Training is based on a fixed power output value so you can ride at a controlled and
Power
constant effort level. You can use the control buttons to set the value.
Training is based on 20 possible resistance levels so you can ride without a specific
Resistance
target, such as a spin class. You can use the control buttons to change the resistance
level.
Floor LED
The floor LED changes colors during training.
LED Color Status
Blue
The trainer is active and working properly.
Purple
Indicates medium power output.
Red
Indicates high power output.
When you stop pedaling for 5 minutes, the LED flashes green one time before going into standby
Green
mode
(Standby Mode,
Off
The trainer is off or in standby mode.
Standby Mode
When not in use, the Tacx NEO Bike Plus trainer goes into standby mode. You can wake up the trainer by
rotating the crank.
External Power Connected: After 5 minutes of no activity, the trainer goes into standby mode.
No External Power: After 10 seconds of no activity, the trainer goes into standby mode.
Training
page 21).
21