Garmin Zumo 590 Manual do Proprietário - Página 22
Procurar online ou descarregar pdf Manual do Proprietário para GPS Garmin Zumo 590. Garmin Zumo 590 26 páginas. Zumo 590
Também para Garmin Zumo 590: Manual do Proprietário (26 páginas), Manual de início rápido (6 páginas), Manual de instruções de instalação (36 páginas), Manual de instruções de instalação (46 páginas)
Imprimir página
You can use an optional mounting disk to mount your device to
the dashboard and comply with certain state regulations. See
www.garmin.com
for more information.
1
Clean and dry the dashboard where you are placing the disk.
2
Remove the backing from the adhesive on the bottom of the
disk.
3
Place the disk on the dashboard.
4
Remove the clear plastic cover from the top of the disk.
5
Place the suction cup mount on top of the disk.
6
Flip the lever down (toward the disk).
Removing the Device, Mount, and Suction
Cup
Removing the Device from the Mount
1
Press the release tab or button on the mount.
2
Tilt the device forward.
Removing the Mount from the Suction Cup
1
Turn the device mount to the right or left.
2
Apply pressure until the socket on the mount releases the
ball on the suction cup.
Removing the Suction Cup from the Windshield
1
Flip the lever on the suction cup toward you.
2
Pull the tab on the suction cup toward you.
Purchasing Additional Maps
1
Go to your device product page at (www.garmin.com).
2
Click the Maps tab.
3
Follow the on-screen instructions.
Safety Cameras
Garmin is not responsible for the accuracy of or the
consequences of using a custom point of interest or a safety
camera database.
NOTE: This feature is not available for all regions or product
models.
Information about safety camera locations and speed limits is
available in some areas for some product models. Go to
www.garmin.com/safetycameras
compatibility, or to purchase a subscription or one-time update.
You can purchase a new region or extend an existing
subscription at any time.
You can update safety cameras for an existing safety camera
subscription by going to http://my.garmin.com. You should
update your device frequently to receive the most up-to-date
safety camera information.
For some devices and regions, basic safety camera data may
be included with your device. Included data does not include
updates or a subscription.
Custom Points of Interest
Custom POIs are customized points on the map. They can
contain alerts that let you know if you are near a designated
point or if you are traveling faster than a specified speed.
Installing POI Loader
You can create or download custom POI lists on your computer
and install them on your device using POI Loader software.
1
Go to www.garmin.com/poiloader.
2
Follow the on-screen instructions.
18
NOTICE
to check availability and
Using the POI Loader Help Files
For more information on the POI loader, refer to the Help file.
With the POI loader open, click Help.
Finding Custom POIs
Before you can find custom POIs, you must load custom POIs
on your device using the POI Loader software
Loader, page
18).
1
Select Where To? > Categories.
2
Scroll to the Other Categories section, and select a category.
Purchasing Accessories
Go to http://buy.garmin.com.
Device Information
Specifications
Water resistance
IEC 60529 IPX7
Operating temperature
-4° to 131°F (-20° to 55°C)
range
Charging temperature
32° to 113°F (0° to 45°C)
range
Power input (CLA,
8–28 Vdc
motorcycle, or external
power)
Power input (USB)
5 V ±0.25 V
Battery life
Up to 4 hours, depending on usage and
settings
Battery type
User-replaceable lithium-ion battery
Battery voltage range
3.5 V–4.1 V
Radio frequency protocol
2.4 GHz ANT+
protocol (for VIRB Remote)
2.4 GHz ANT
System)
Troubleshooting
My device is not acquiring satellite signals
• Verify the GPS simulator is turned off
page
16).
• Take your device out of parking garages and away from tall
buildings and trees.
• Remain stationary for several minutes.
The device does not charge in my vehicle
• Check the fuse in the vehicle power cable
Fuse in the Vehicle Power Cable, page
• Verify the vehicle is turned on and is supplying power to the
power outlet.
• Verify the interior temperature of the vehicle is between 32°
and 113°F (between 0° and 45°C).
• Verify that the fuse is not broken in the vehicle power outlet.
My battery does not stay charged for very
long
• Decrease the screen brightness
• Shorten the display timeout
• Decrease the volume
(Adjusting the Volume, page
• Disable Bluetooth wireless technology
page
16).
• Put the device in sleep mode when not in use
Exiting Sleep Mode, page
(Installing POI
wireless communications
®
(for Tire Pressure Monitor
®
(Navigation Settings,
(Changing the
17).
(Display Settings, page
(Display Settings, page
16).
3).
(Disabling Bluetooth,
(Entering and
3).
Device Information
16).