Garmin D2 Pilot Manual do Proprietário - Página 10

Procurar online ou descarregar pdf Manual do Proprietário para Ver Garmin D2 Pilot. Garmin D2 Pilot 24 páginas.
Também para Garmin D2 Pilot: Manual de início rápido (4 páginas), Manual do Proprietário (24 páginas), Manual de início rápido (4 páginas)

Imprimir página

Compass

The device has a 3-axis compass with automatic calibration.

The compass features and appearance change depending on

the profile you are using

(Changing

enabled, and whether you are navigating to a destination. You

can also manually change the compass settings

Settings).

Navigating with the Horizontal Situation Indicator

While navigating, from the time of day page, select

Course line pointer. Indicates the direction of the desired course

line from your starting point to your next waypoint.

Bearing indicator. Indicates the bearing to your next waypoint.

To-and-from indicator. Indicates whether you are headed to or

from the waypoint.

Course deviation indicator (CDI). Indicates the location of the

desired course line in relation to your location.

Course deviation distance. The dots indicate your distance off

course.

TIP: You can select the action key to adjust the scale.

Change your direction until the bearing indicator is aligned

with the painted mark at the top of watch bezel to move

toward your next waypoint.

TIP: If the to-and-from indicator points opposite the course

line pointer, you are moving away from your next waypoint.

Continue toward your next waypoint.

The course deviation indicator moves toward the course line

pointer. When the course deviation indicator is fully aligned

with the course line pointer, you are on the selected course

to your next waypoint.

Calibrating the Compass

Calibrate the electronic compass outdoors. To improve heading

accuracy, do not stand near objects that influence magnetic

fields, such as vehicles, buildings, and overhead power lines.

Your device was already calibrated at the factory, and the

device uses automatic calibration by default. If you experience

irregular compass behavior, for example, after moving long

distances or after extreme temperature changes, you can

manually calibrate the compass.

Select the action key.

Select Setup > Sensors > Compass > Calibrate > Start.

Follow the on-screen instructions.

Map

represents your location on the map. As you travel, the icon

moves and leaves a track log (trail). Waypoint names and

symbols appear on the map. When you are navigating to a

destination, your route is marked with a line on the map.

• Map navigation

(Browsing the

• Map settings

(Map

Settings)

Browsing the Map

While navigating, select

Select the action key.

Profiles), whether GPS is

(Compass

NOTICE

Map)

to view the map.

Select an option:

• To pan up or down, select Pan, and select

• To pan right or left, select Pan >

• To navigate to a saved location, select Pan, select the

action key, and select Select Pt..

• To zoom in or out, select Zoom, and select

Navigating Using TracBack ®

While navigating, you can navigate back to the beginning of

your track. This can be helpful when finding your way back to

camp or the trail head.

Select the action key.

Select Tracks > Current > TracBack.

Your current location

appear on the map.

Altimeter and Barometer

The device contains an internal altimeter and barometer.

• On Demand sensor data

• Always On sensor data

• Altimeter settings

• Altimeter and barometric readings

Readings)

Calibrating the Barometric Altimeter

Your device was already calibrated at the factory, and the

device uses automatic calibration at your GPS starting point by

default. You can manually calibrate the barometric altimeter if

you know the correct elevation or the correct sea level pressure.

Select the action key.

Select Setup > Sensors > Altimeter.

Select an option:

• Select Auto Cal. > At Start to calibrate automatically from

your GPS starting point.

• Select Auto Cal. > Continuous to calibrate automatically

with periodic GPS calibration updates.

• Select Calibrate to enter the current elevation or sea-

level pressure.

Tracking Weather Changes Overnight

You can use your device to track changes in barometric

pressure over time. Increases in barometric pressure usually

indicate good weather, and decreases in barometric pressure

usually indicate bad weather.

Select the action key.

Select Setup > Sensors > Mode > Always On.

Select

repeatedly to return to the time of day page.

Select

repeatedly until the barometric data page appears.

The current barometric pressure appears in large numbers,

and the range of previous readings for the graph shown

appears in small numbers at the bottom of the page.

Compare the current reading with earlier readings to see if

the barometric pressure is increasing or decreasing.

, and select

, track to follow

, and end point

(Viewing the Data

Pages)

(Turning on a Sensor

(Altimeter

Settings)

(Altimeter and Barometric

Mode)

Navigation