Garmin Descent MK1 Manual do Proprietário - Página 36
Procurar online ou descarregar pdf Manual do Proprietário para Ver Garmin Descent MK1. Garmin Descent MK1 46 páginas.
Imprimir página
Situational Awareness
Your Descent device can be used with the Varia Vision
Varia
smart bike lights, and rearview radar to improve
™
situational awareness. See the owner's manual for your Varia
device for more information.
NOTE: You may need to update the Descent software before
pairing Varia devices
(Updating the Software Using Garmin
Connect Mobile, page
22).
Foot Pod
Your device is compatible with the foot pod. You can use the
foot pod to record pace and distance instead of using GPS when
you are training indoors or when your GPS signal is weak. The
foot pod is on standby and ready to send data (like the heart
rate monitor).
After 30 minutes of inactivity, the foot pod powers off to
conserve the battery. When the battery is low, a message
appears on your device. Approximately five hours of battery life
remain.
Improving Foot Pod Calibration
Before you can calibrate your device, you must acquire GPS
signals and pair your device with the foot pod
Sensors, page
29).
The foot pod is self-calibrating, but you can improve the
accuracy of the speed and distance data with a few outdoor runs
using GPS.
1
Stand outside for 5 minutes with a clear view of the sky.
2
Start a running activity.
3
Run on a track without stopping for 10 minutes.
4
Stop your activity, and save it.
Based on the recorded data, the foot pod calibration value
changes, if necessary. You should not need to calibrate the
foot pod again unless your running style changes.
Calibrating Your Foot Pod Manually
Before you can calibrate your device, you must pair your device
with the foot pod sensor
(Pairing ANT+ Sensors, page
Manual calibration is recommended if you know your calibration
factor. If you have calibrated a foot pod with another Garmin
product, you may know your calibration factor.
1
Hold UP.
2
Select Settings > Sensors & Accessories.
3
Select your foot pod.
4
Select Cal. Factor > Set Value.
5
Adjust the calibration factor:
• Increase the calibration factor if your distance is too low.
• Decrease the calibration factor if your distance is too high.
Setting Foot Pod Speed and Distance
Before you can customize the foot pod speed and distance, you
must pair your device with the foot pod sensor
Sensors, page
29).
You can set your device to calculate speed and distance using
your foot pod data instead of GPS data.
1
Hold UP.
2
Select Settings > Sensors & Accessories.
3
Select your foot pod.
4
Select Speed or Distance.
5
Select an option:
• Select Indoor when you are training with GPS turned off,
usually indoors.
• Select Always to use your foot pod data regardless of the
GPS setting.
30
tempe
™
device,
The tempe is an ANT+ wireless temperature sensor. You can
attach the sensor to a secure strap or loop where it is exposed
to ambient air, and therefore, provides a consistent source of
accurate temperature data. You must pair the tempe with your
device to display temperature data from the tempe.
Descent Mk1 Specifications
Battery type
Battery life
Water rating
Operating and storage
temperature range
Under water operating
temperature range
Charging temperature
range
Wireless frequencies
(Pairing ANT+
Wireless protocols
*The device withstands pressure equivalent to a depth of 100 m.
For more information, go to www.garmin.com/waterrating.
**Designed to comply with EN 13319.
Battery Information
The actual battery life depends on the features enabled on your
device, such as activity tracking, wrist-based heart rate,
smartphone notifications, GPS, internal sensors, and connected
sensors.
Battery Life
29).
Up to 12 days Smartwatch mode with activity tracking and 24/7 wrist-
Up to 20 hours Dive mode
Up to 35 hours UltraTrac GPS mode with gyro-based dead reckoning
Data Management
NOTE: The device is not compatible with Windows
Windows NT
Disconnecting the USB Cable
If your device is connected to your computer as a removable
drive or volume, you must safely disconnect your device from
your computer to avoid data loss. If your device is connected to
your Windows computer as a portable device, it is not necessary
(Pairing ANT+
to safely disconnect the device.
1
Complete an action:
• For Windows computers, select the Safely Remove
• For Apple computers, select the device, and select File >
2
Disconnect the cable from your computer.
Deleting Files
If you do not know the purpose of a file, do not delete it. Your
device memory contains important system files that should not
be deleted.
1
Open the Garmin drive or volume.
Device Information
Rechargeable, built-in lithium-ion battery
Up to 12 days
10 ATM* Dive (EN 13319)**
From -20º to 50ºC (from -4º to 122ºF)
From 0º to 40ºC (from 32º to 104ºF)
From 0º to 45ºC (from 32º to 113ºF)
ANT+ 2.4 GHz @ -1 dBm nominal, Bluetooth
2.4 GHz @ 0 dBm nominal, Wi‑Fi 2.4 GHz @
12 dBm nominal
ANT+ wireless technology
Bluetooth Smart device
Wi‑Fi technology (applicable models)
Mode
based heart rate monitoring
GPS mode with wrist-based heart rate
, and Mac
OS 10.3 and earlier.
®
®
Hardware icon in the system tray, and select your device.
Eject.
NOTICE
®
95, 98, Me,
Device Information