Garmin fenix Manual do Proprietário - Página 13

Procurar online ou descarregar pdf Manual do Proprietário para Ver Garmin fenix. Garmin fenix 18 páginas. Turn on smart watch of 2022 - go wiki
Também para Garmin fenix: Manual de iniciação (4 páginas), Manual do Proprietário (22 páginas), Manual de início rápido (18 páginas), Perguntas frequentes (5 páginas), Como fazer (8 páginas)

Imprimir página

Follow the on-screen instructions to select the number of

data fields and the type of data to appear.

If necessary, select an existing data page.

Select an option:

• Select Edit, and change the data fields.

• Select Move Up or Move Down to change the order of

the data pages.

• Select Delete to remove the data page from the page

loop.

System Settings

Select Setup > System.

GPS Mode: Sets the GPS to Normal, UltraTrac

Demo Mode (GPS off).

WAAS: Sets the device to use Wide Area Augmentation

System (WAAS) GPS signals. For information about WAAS,

go to www.garmin.com/aboutGPS/waas.html.

Hold Keys: Allows you to customize the hold function of the

arrow keys

(page

1).

Language: Sets the text language on the device.

NOTE: Changing the text language does not change the

language of user-entered data or map data.

About UltraTrac

UltraTrac is a GPS setting that records one point per minute.

This allows you to use GPS tracking for up to 50 hours.

Compass Settings

Select Setup > Sensors > Compass.

Display: Sets the directional heading on the compass to

degrees or milli-radians.

North Ref.: Sets the north reference of the compass

(page

9).

Mode: Sets the compass to use either a combination of GPS

and the electronic sensor data when moving (Auto) or GPS

data only (Off).

Calibrate: Allows you to manually calibrate the compass sensor

(page

5).

Setting the North Reference

You can set the directional reference used in calculating

heading information.

Select the Orange key.

Select Setup > Sensors > Compass > North Ref..

Select an option:

• To set geographic north as the heading reference, select

True.

• To set the magnetic declination for your location

automatically, select Magnetic.

• To set grid north (000º) as the heading reference, select

Grid.

• To set the magnetic variation value manually, select User,

enter the magnetic variance, and select Done.

Altimeter Settings

Select Setup > Sensors > Altimeter.

Auto Cal.: Allows the altimeter to self-calibrate each time you

turn on GPS tracking.

Baro. Plot: Variable records changes in elevation while you are

moving. Fixed assumes the device is stationary at a fixed

elevation. Therefore, the barometric pressure should only

change due to weather. Amb. Press. records ambient

pressure changes over a period of time.

Customizing Your Device

Elev. Plot: Sets the device to record elevation changes over a

period of time or distance.

Setting the Device Tones

You can customize tones for messages and keys.

Select the Orange key.

Select Setup > Tones.

Select Messages or Keys.

Select an option.

Display Settings

Select Setup > Display.

(page

9), or

Backlight: Adjusts the backlight level and the length of time

before the backlight turns off.

Contrast: Adjusts the screen contrast.

Map Settings

Select Setup > Map.

Orientation: Adjusts how the map is shown on the page. North

Up shows North at the top of the page. Track Up shows your

current direction of travel toward the top of the page.

Auto Zoom: Automatically selects the appropriate zoom level

for optimal use on your map. When Off is selected, you must

zoom in or out manually.

Points: Selects the zoom level for points on the map.

Track Log: Allows you to show or hide tracks on the map.

Go To Line: Allows you to select how the course appears on

the map.

Track Settings

Select Setup > Tracks.

Method: Selects a track recording method. Auto records the

tracks at a variable rate to create an optimum representation

of your tracks. If you select Distance or Time, you can set

the interval rate manually.

Interval: Allows you to set the track log recording rate.

Recording points more frequently creates a more-detailed

track, but it fills the track log faster.

Auto Start: Sets the device to record your track automatically

when you select Start GPS.

Auto Save: Sets the device to automatically save your track

when you turn off GPS.

Auto Pause: Sets the device to stop recording your track when

you are not moving.

Output: Sets the device to save the track as a GPX file or a

GPX/FIT file

Time Settings

Select Setup > Time.

Time Page: Allows you to customize the appearance of the time

of day.

Format: Allows you to select a 12-hour or a 24-hour display

time.

Time Zone: Allows you to select the time zone for the device.

You can select Auto to set the time zone automatically

based on your GPS position.

Changing the Units of Measure

You can customize units of measure for distance and speed,

elevation, depth, temperature, and pressure.

Select the Orange key.

Select Setup > Units.

(page

11).