Garmin Fenix5 Manual do Proprietário - Página 9

Procurar online ou descarregar pdf Manual do Proprietário para Ver Garmin Fenix5. Garmin Fenix5 42 páginas.

Garmin Fenix5 Manual do Proprietário
4
Select the activity settings.
5
Select Metronome > Status > On.
6
Select an option:
• Select Beats / Minute to enter a value based on the
cadence you want to maintain.
• Select Alert Frequency to customize the frequency of the
beats.
• Select Sounds to customize the metronome tone and
vibration.
7
If necessary, select Preview to listen to the metronome
feature before you run.
8
Hold DOWN to return to the clock.
9
Go for a run
(Starting an Activity, page
The metronome starts automatically.
10
During your run, select UP or DOWN to view the metronome
screen.
11
If necessary, hold MENU to change the metronome settings.

Jumpmaster

The jumpmaster feature is for use by experienced skydivers
only. The jumpmaster feature should not be used as a primary
skydiving altimeter. Failure to input the appropriate jump related
information can lead to serious personal injury or death.
The jumpmaster feature follows military guidelines for
calculating the high altitude release point (HARP). The device
detects automatically when you have jumped to begin navigating
toward the desired impact point (DIP) using the barometer and
electronic compass.

Multisport

Triathletes, duathletes, and other multisport competitors can
take advantage of the multisport activities, such as Triathlon or
Swimrun. During a multisport activity, you can transition
between activities and continue to view your total time and
distance. For example, you can switch from biking to running
and view your total time and distance for biking and running
throughout the multisport activity.
You can customize a multisport activity, or you can use the
default triathlon activity set up for a standard triathlon.

Creating a Multisport Activity

1
From the watch face, select
2
Select a multisport activity type, or enter a custom name.
Duplicate activity names include a number, for example:
Triathlon(2).
3
Select two or more activity profiles.
4
Select an option:
• Select an option to customize specific activity settings. For
example, you can select whether to include transitions.
• Select Done to save and use the multisport activity.
5
Select Yes to add the activity to your list of favorites.
Tips for Triathlon Training or Using Multisport
Activities
• Select
to start your first activity.
• Select LAP to transition to the next activity.
If transitions are turned on, the transition time is recorded
separately from the activity times.
• If necessary, select LAP to start the next activity.
• Select UP or DOWN to view additional data pages.
Activities
2).
WARNING
> Add > Multisport.

Swimming

The device is intended for surface swimming. Scuba diving with
the device may damage the product and will void the warranty.
NOTE: The device cannot record heart rate data while
swimming.
NOTE: The device is compatible with the HRM-Tri
and the HRM-Swim
accessory
page
5).

Swim Terminology

Length: One trip down the pool.
Interval: One or more consecutive lengths. A new interval starts
after a rest.
Stroke: A stroke is counted every time your arm wearing the
device completes a full cycle.
Swolf: Your swolf score is the sum of the time for one pool
length and the number of strokes for that length. For
example, 30 seconds plus 15 strokes equals a swolf score of
45. For open water swimming, swolf is calculated over 25
meters. Swolf is a measurement of swimming efficiency and,
like golf, a lower score is better.

Stroke Types

Stroke type identification is available only for pool swimming.
Your stroke type is identified at the end of a length. Stroke types
appear when you are viewing interval history. You can also
select stroke type as a custom data field
Screens, page
19).
Free
Freestyle
Back
Backstroke
Breast Breaststroke
Fly
Butterfly
Mixed More than one stroke type in an interval
Drill
Used with drill logging

Tips for Swimming Activities

• Before starting a pool swimming activity, follow the on-screen
instructions to select your pool size or enter a custom size.
• Select LAP to record a rest during pool swimming.
The device automatically records swim intervals and lengths
for pool swimming.
• Select LAP to record an interval during open water
swimming.

Resting During Pool Swimming

The default rest screen displays two rest timers. It also displays
time and distance for the last completed interval.
NOTE: Swim data is not recorded during a rest.
1
During your swim activity, select LAP to start a rest.
The display reverses to white text on a black background,
and the rest screen appears.
2
During a rest, select UP or DOWN to view other data screens
(optional).
3
Select LAP, and continue swimming.
4
Repeat for additional rest intervals.

Training with the Drill Log

The drill log feature is available only for pool swimming. You can
use the drill log feature to manually record kick sets, one-arm
swimming, or any type of swimming that is not one of the four
major strokes.
1
During your pool swim activity, select UP or DOWN to view
the drill log screen.
2
Select LAP to start the drill timer.
NOTICE
accessory
(Heart Rate While Swimming,
(Customizing the Data
(Training with the Drill Log, page
3)
3