Garmin IPH-A3095 Manual do Proprietário - Página 36

Procurar online ou descarregar pdf Manual do Proprietário para Ver Garmin IPH-A3095. Garmin IPH-A3095 46 páginas.

Imprimir página

Situational Awareness

Your Descent device can be used with the Varia Vision

Varia

smart bike lights, and rearview radar to improve

™

situational awareness. See the owner's manual for your Varia

device for more information.

NOTE: You may need to update the Descent software before

pairing Varia devices

(Updating the Software Using Garmin

Connect Mobile, page

22).

Foot Pod

Your device is compatible with the foot pod. You can use the

foot pod to record pace and distance instead of using GPS when

you are training indoors or when your GPS signal is weak. The

foot pod is on standby and ready to send data (like the heart

rate monitor).

After 30 minutes of inactivity, the foot pod powers off to

conserve the battery. When the battery is low, a message

appears on your device. Approximately five hours of battery life

remain.

Improving Foot Pod Calibration

Before you can calibrate your device, you must acquire GPS

signals and pair your device with the foot pod

Sensors, page

29).

The foot pod is self-calibrating, but you can improve the

accuracy of the speed and distance data with a few outdoor runs

using GPS.

Stand outside for 5 minutes with a clear view of the sky.

Start a running activity.

Run on a track without stopping for 10 minutes.

Stop your activity, and save it.

Based on the recorded data, the foot pod calibration value

changes, if necessary. You should not need to calibrate the

foot pod again unless your running style changes.

Calibrating Your Foot Pod Manually

Before you can calibrate your device, you must pair your device

with the foot pod sensor

(Pairing ANT+ Sensors, page

Manual calibration is recommended if you know your calibration

factor. If you have calibrated a foot pod with another Garmin

product, you may know your calibration factor.

Hold UP.

Select Settings > Sensors & Accessories.

Select your foot pod.

Select Cal. Factor > Set Value.

Adjust the calibration factor:

• Increase the calibration factor if your distance is too low.

• Decrease the calibration factor if your distance is too high.

Setting Foot Pod Speed and Distance

Before you can customize the foot pod speed and distance, you

must pair your device with the foot pod sensor

Sensors, page

29).

You can set your device to calculate speed and distance using

your foot pod data instead of GPS data.

Hold UP.

Select Settings > Sensors & Accessories.

Select your foot pod.

Select Speed or Distance.

Select an option:

• Select Indoor when you are training with GPS turned off,

usually indoors.

• Select Always to use your foot pod data regardless of the

GPS setting.

tempe

™

device,

The tempe is an ANT+ wireless temperature sensor. You can

attach the sensor to a secure strap or loop where it is exposed

to ambient air, and therefore, provides a consistent source of

accurate temperature data. You must pair the tempe with your

device to display temperature data from the tempe.

Descent Mk1 Specifications

Battery type

Battery life

Water rating

Operating and storage

temperature range

Under water operating

temperature range

Charging temperature

range

Wireless frequencies

(Pairing ANT+

Wireless protocols

*The device withstands pressure equivalent to a depth of 100 m.

For more information, go to www.garmin.com/waterrating.

**Designed to comply with EN 13319.

Battery Information

The actual battery life depends on the features enabled on your

device, such as activity tracking, wrist-based heart rate,

smartphone notifications, GPS, internal sensors, and connected

sensors.

Battery Life

29).

Up to 12 days Smartwatch mode with activity tracking and 24/7 wrist-

Up to 20 hours Dive mode

Up to 35 hours UltraTrac GPS mode with gyro-based dead reckoning

Data Management

NOTE: The device is not compatible with Windows

Windows NT

Disconnecting the USB Cable

If your device is connected to your computer as a removable

drive or volume, you must safely disconnect your device from

your computer to avoid data loss. If your device is connected to

your Windows computer as a portable device, it is not necessary

(Pairing ANT+

to safely disconnect the device.

Complete an action:

• For Windows computers, select the Safely Remove

• For Apple computers, select the device, and select File >

Disconnect the cable from your computer.

Deleting Files

If you do not know the purpose of a file, do not delete it. Your

device memory contains important system files that should not

be deleted.

Open the Garmin drive or volume.

Device Information

Rechargeable, built-in lithium-ion battery

Up to 12 days

10 ATM* Dive (EN 13319)**

From -20º to 50ºC (from -4º to 122ºF)

From 0º to 40ºC (from 32º to 104ºF)

From 0º to 45ºC (from 32º to 113ºF)

ANT+ 2.4 GHz @ -1 dBm nominal, Bluetooth

2.4 GHz @ 0 dBm nominal, Wi‑Fi 2.4 GHz @

12 dBm nominal

ANT+ wireless technology

Bluetooth Smart device

Wi‑Fi technology (applicable models)

Mode

based heart rate monitoring

GPS mode with wrist-based heart rate

, and Mac

OS 10.3 and earlier.

Hardware icon in the system tray, and select your device.

Eject.

NOTICE

95, 98, Me,

Device Information