Garmin GPSMAP 800 Series Manual do Proprietário - Página 31

Procurar online ou descarregar pdf Manual do Proprietário para Sistema de navegação automóvel Garmin GPSMAP 800 Series. Garmin GPSMAP 800 Series 40 páginas. Flat-mount kit
Também para Garmin GPSMAP 800 Series: Manual de início rápido (17 páginas), Adenda ao Manual do Piloto (22 páginas), Manual de início rápido (4 páginas), Manual do Proprietário (46 páginas), Manual de instruções de instalação (6 páginas), Manual do operador (32 páginas), Manual de instruções de instalação (34 páginas), Manual de instruções de instalação (6 páginas)

Imprimir página

Garmin GPSMAP 800 Series Manual do Proprietário

Select a category.

Saving a SiriusXM Channel to the Presets List

You can save your favorite channels to the presets list.

Select Media.

Select the channel you want to save as a preset.

Select MENU > Presets > Add Current Channel.

Adjusting SiriusXM Satellite Radio Volume

Select Media > MENU.

Select

Device Configuration

Turning On the Chartplotter Automatically

You can set the chartplotter to turn on automatically when the

power is applied. Otherwise, you must turn on the chartplotter

by pressing .

Select Settings > System > Auto Power.

NOTE: When Auto Power is On, and the chartplotter is

turned off using , and power is removed and reapplied

within less than two minutes, you may need to press

restart the chartplotter.

System Settings

Select Settings > System.

Display: Adjusts the backlight brightness and color scheme.

Beeper: Turns on and off the tone that sounds for alarms and

selections.

GPS: Provides information about the GPS satellite settings and

fix.

Auto Power: Turns on the device automatically when power is

applied

(Turning On the Chartplotter

Language: Sets the on-screen text language.

Speed Sources: Sets the source of the speed data used to

calculate true wind speed or fuel economy. Water speed is

the speed reading from a water-speed sensor, and GPS

speed is calculated from your GPS position.

System Information: Provides information about the device

and the software version.

Simulator: Turns on the simulator and allows you to set the

speed and simulated location.

GPS Settings

Select Settings > System > GPS.

Skyview: Shows the relative position of GPS satellites in the

sky.

GLONASS: Turns on or off GLONASS usage (Russia satellite

system). When the system is used in situations with poor sky

visibility, this configuration can be used in combination with

GPS to provide more accurate position information.

WAAS/EGNOS: Turns on or off WAAS (in North America) or

EGNOS (in Europe), which can provide more-accurate GPS

position information. When using WAAS or EGNOS, the

device may take longer to acquire satellites.

Speed Filter: Averages the speed of your vessel over a short

period of time for smoother speed values.

Viewing the Event Log

The event log shows a list of system events.

Select Settings > System > System Information > Event

Log.

Device Configuration

Automatically).

Viewing System Software Information

You can view the software version, the basemap version, any

supplemental map information (if applicable), the software

version for an optional Garmin radar (if applicable), and the unit

ID number. You may need this information to update the system

software or to purchase additional map data information.

Select Settings > System > System Information >

Software Information.

My Vessel Settings

NOTE: Some settings and options require additional charts or

hardware.

Select Settings > My Vessel.

Keel Offset: Offsets the surface reading for the depth of a keel,

making it possible to measure depth from the bottom of the

keel instead of from the transducer location

Offset).

Temp. Offset: Compensates for the water temperature reading

from a NMEA 0183 water-temperature sensor or a

temperature-capable transducer

Temperature

Offset).

Calibrate Water Speed: Calibrates the speed-sensing

transducer or sensor

(Calibrating a Water Speed

Fuel Capacity: Sets the combined fuel capacity of all the fuel

tanks on your vessel

(Setting the Fuel Capacity of the

Vessel).

Vessel Type: Enables some chartplotter features based on the

boat type.

Fill Up All Tanks: Sets the tank levels to full

Fuel Data with the Actual Vessel

Add Fuel to Boat: Allows you to enter the quantity of fuel you

added to your tank, when you did not entirely fill up the tank

(Synchronizing the Fuel Data with the Actual Vessel

Set Total Fuel Onboard: Sets the combined amount of fuel in

all the fuel tanks on your vessel

Data with the Actual Vessel

Set Gauge Limits: Sets the upper and lower limits of various

gauges

(Customizing Engine Gauge and Fuel Gauge

Setting the Keel Offset

You can enter a keel offset to compensate the surface reading

for the depth of a keel, making it possible to measure depth

from the bottom of the keel instead of from the transducer

location. Enter a positive number to offset for a keel. You can

enter a negative number to compensate for a large vessel that

may draw several feet of water.

Complete an action, based on the location of the transducer:

• If the transducer is installed at the water line

the distance from the transducer location to the keel of the

boat. Enter this value in steps 3 and 4 as a positive

number.

• If the transducer is installed at the bottom of the keel

measure the distance from the transducer to the water

line. Enter this value in steps 3 and 4 as a negative

number.

(Setting the Keel

(Setting the Water

Device).

(Synchronizing the

Fuel).

(Synchronizing the Fuel

Fuel).

Limits).

, measure