Garmin nuvi 200 Series Manual de configuração - Página 10

Procurar online ou descarregar pdf Manual de configuração para Sistema de navegação automóvel Garmin nuvi 200 Series. Garmin nuvi 200 Series 17 páginas. Declaration of conformity
Também para Garmin nuvi 200 Series: Manual do Proprietário (50 páginas), Manual de configuração (17 páginas), Informações sobre segurança e produtos (32 páginas), Instruções e regras (8 páginas), Manual de instruções (28 páginas), Declaração de Conformidade (1 páginas), Começar a trabalhar (16 páginas)

Mounting on Your

Dashboard

Use the enclosed mounting disk to

mount your unit to the dashboard

and to comply with certain state

regulations.

iMPOrTaNT: The permanent

mounting adhesive is extremely

difficult to remove after it is

installed.

1. Clean and dry the dashboard where

you are placing the disk.

2. Remove the backing from the

permanent mounting adhesive on the

bottom of the disk.

3. Place the disk on the dashboard.

4. Place the suction cup mount on

top of the disk. Flip the lever down

(toward the disk).

CauTiON: When replacing the

fuse, do not lose any of the small

pieces and make sure they are put

back in the proper place.

If your unit will not charge in your

vehicle, you may need to replace the

fuse located at the tip of the vehicle

adapter.

1. Unscrew and

remove the silver

or black, round end

piece.

2. Remove the fuse (glass and silver

cylinder) and replace with a 1A fast

blow fuse.

3. Ensure that the

silver tip is placed

in the end piece.

Screw on the end

piece.

nüvi 00/50/70 set up and go! guide

Unscrew

end

piece

silver tip

fuse