Garmin RV-IN1501 Instruções de instalação - Página 4
Procurar online ou descarregar pdf Instruções de instalação para Sistema de navegação automóvel Garmin RV-IN1501. Garmin RV-IN1501 4 páginas. Rv infotainment system
Também para Garmin RV-IN1501: Manual do Proprietário (36 páginas)
Imprimir página
Installing the Infotainment System
To install the infotainment system, you need a custom metal
bracket supplied by the RV manufacturer.
1
Remove the dash trim and bezel around the stereo
installation location.
2
If necessary, attach the metal bracket supplied by the RV
manufacturer to the dash according to the RV manufacturer
specifications.
3
Connect the included wiring harnesses to the vehicle wiring
harness and other A/V connectors as needed.
You can consult the wiring diagrams to identify specific
connectors and wires
(Wiring Harnesses, page
4
Route all harnesses and other wiring through the opening in
the dashboard, and make all necessary wiring connections to
the back of the infotainment system
page
2).
5
Place the RV-IN1501 infotainment system into the bracket
and dashboard, inserting the four threaded rods
the four holes
in the bracket.
6
Place the four included washers
7
Thread the four included wingnuts
and tighten them to secure the infotainment system to the
bracket.
8
Install the dashboard trim and bezel around the infotainment
system.
Stereo Information
Specifications
General
Operating temperature range
Storage temperature range
Input voltage
Current (max.)
Current (muted)
Current (standby mode)
Fuse
Bluetooth
®
wireless range
ANT
wireless range
®
Wireless frequencies/
protocols
2).
(Connector Identification,
through
onto the threaded rods.
onto the threaded rods,
From -10 to 60°C (from 14 to 140°F)
From -20 to 70°C (from -4 to 158°F)
From 10.8 to 16 Vdc
15 A
Less than 1 A
Less than 5 mA
15 A mini blade-type
Up to 10 m (30 ft.)
Up to 3 m (10 ft.)
Wi‑Fi
2.4 GHz @ +15 dBm nominal
®
Bluetooth 2.4 GHz @ +10 dBm nominal
ANT 2.4 GHz @ +4 dBm nominal
On-board, Class D Amplifier
Output music power per
channel
Total output peak power
Output power per channel
Line output level (max.)
Aux input level (typical)
*The stereo may limit the output power to prevent the amplifier
from overheating, and to maintain the audio dynamics.
Tuner
FM radio
frequency range
FM frequency
step
AM radio
frequency range
AM frequency
step
© 2018 Garmin Ltd. or its subsidiaries
Garmin
®
, the Garmin logo, FUSION
or its subsidiaries, registered in the USA and other countries.
Android
is a trademark of Google Inc. Apple
™
trademarks of Apple Inc., registered in the U.S. and other countries. Bluetooth
mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by
Garmin is under license. microSD
LLC. SiriusXM
is a registered trademark of SiriusXM Radio Inc. Wi‑Fi
®
trademark of Wi-Fi Alliance Corporation.
support.garmin.com
4 x 70 W max. 2 ohm
280 W max.
4 x 43 W RMS at 14.4 Vdc input,
2 ohm, 10% THD*
4 x 26 W RMS at 14.4 Vdc input,
4 ohm, 10% THD*
5.5 V (peak to peak)
1 V RMS
Europe and
USA
Australasia
87.5 to 108 MHz
87.5 to
107.9 MHz
50 kHz
200 kHz
522 to 1620 kHz
530 to
1710 kHz
9 kHz
10 kHz
®
, and the Fusion logo are trademarks of Garmin Ltd.
®
, the Apple logo, iPod
®
and the microSDHC logo are trademarks of SD-3C,
Japan
76 to 95 MHz
50 kHz
522 to
1620 kHz
9 kHz
®
, and Mac
®
are
®
word
is a registered
®