Garmin GMA 1347D Manual de instalação - Página 24

Procurar online ou descarregar pdf Manual de instalação para Ecrã de aviónica Garmin GMA 1347D. Garmin GMA 1347D 47 páginas.

Imprimir página
Garmin GMA 1347D Manual de instalação
Manufacturer
Hand
Crimping Tool
Military P/N
M22520/2-01
Positronic
9507
ITT Cannon
995-0001-584
AMP
601966-1
Daniels
AFM8
Astro
615717
1. Non-Garmin part numbers shown are not maintained by Garmin and consequently are subject
to change without notice.
2. Extracting the #16, #18 and #20 contact requires that the expanded wire barrel be cut off from
the contact. It may also be necessary to push the pin out from the face of the connector when
using an extractor due to the absence of the wire. A new contact must be used when
reassembling the connector.
3. For applications using 16 AWG wire, contact Garmin for information regarding connector
crimp positioner tooling.
3.5

Backshell Assembly

The GMA 1347D connector kit includes two Garmin backshell assemblies. Garmin's backshell
connectors give the installer the ability to quickly and easily terminate shield grounds at the backshell
housing using the G1000 Shield Block. To assemble the backshell connectors and grounding system,
refer to instructions provided in the Shield Block Installation Instructions (190-00313-09).
Page 3-2
Revision C
Table 3-2. Recommended Crimp Tools
18-20 AWG
Positioner
Insertion/
Extraction Tool
(Note 2)
N/A
M81969/1-04
9502-11
M81969/1-04
N/A
N/A
N/A
91067-1
K774
M81969/1-04
N/A
M81969/1-04
NOTES
22-28 AWG
Positioner
Insertion/
Extraction
Tool
M22520/2-09
M81969/1-04
9502-3
M81969/1-04
995-0001-739
N/A
601966-6
91067-1
K42
M81969/1-04
615725
M81969/1-04
GMA 1347D Installation Manual
190-00303-21