Garmin GMX 200 Manual do Piloto - Página 14

Procurar online ou descarregar pdf Manual do Piloto para Ecrã de aviónica Garmin GMX 200. Garmin GMX 200 16 páginas. Garmin gmx 200: install guide
Também para Garmin GMX 200: Manual de referência (2 páginas), Manual de instalação (6 páginas), Especificação (6 páginas)

Imprimir página

GMX 200 Safety Monitor Codes

The GMX 200 is designed to detect anomalies and unexpected operational

and data events. When an anomaly or event occurs, the unit assumes the situ-

ation is unrecoverable and continued unit operation is ill-advisable. Regardless

of the code, neither the unit nor operator has enough information to identify the

source and resolve the problem. To avoid the possibility of displaying mislead-

ing data, the unit reboots itself to restore normal operations.

When an event occurs, the unit identifies the section of the software where

the problem was detected. A code is displayed on the error screen before the re-

boot and in the MSG function after the reboot. Codes are organized by subsys-

tem and functional block. See the table below for the list of codes. Error codes

include four digits. The first two identify the function or software section that

detected the error. The last two digits indicate a specific line or software instruc-

tion. The error code is an indication where the error was detected. However, in

most cases it is not where the error occurred.

If the error code condition clears and does not return after resetting the

unit, it can be assumed that the condition causing the code was temporary and

the unit will continue to function properly. If the condition causing the event

persists, the unit will detect the event and issue another reboot along with a

code, typically the same code. This will continue until the unit is turned off or

the condition causing the event is resolved.

Repeated occurrences of the same code indicate there may be a problem

with the installation, with a sensor providing data to the GMX 200, or within

the GMX 200. This situation should be analyzed in order to determine the

root cause of the problem. Should a code be displayed twice within a short

amount of time, please record the four-digit code if practical along with any

other symptoms or information, and report the event to your Garmin technical

support representative for further analysis. The GMX 200 also records log files

on the SD card. A copy of these files should also be provided to Garmin to help

investigate the problem.

Operational Response

Codes are not indicators that provide specific operational guidance (i.e., go

or no-go). There is no specific action to be taken by the flight crew based on the

displayed code. Codes are an indication that the unit may have received unex-

pected data, had a problem processing the received data, or other difficulty.

The following are recommended actions based on the current situation:

Pre-Flight and Post-Flight

If a code appears, the pilot should let the unit reboot. If the problem does

not reappear, the operation may proceed. If the code continues to appear mul-

tiple times, the pilot should have the problem investigated by a mechanic. Re-

peated problems must be reported to Garmin technical support representative

along with the code number and logfile(s).

During Flight

If a code appears, the pilot should let the unit reboot. If the problem does

not reappear, the flight may continue. If the code continues to appear multiple

times, the flight may continue at the pilot' s discretion. The pilot has the option

to turn the unit off. Repeated problems must be reported to Garmin technical

support representative along with the code number and logfile(s).

Code

0xx

1xx

2xx

3xx

4xx

5xx

6xx

7xx

8xx

9xx

10xx

11xx

12xx

13xx

14xx

15xx

16xx

17xx

18xx

19xx

45xx

46xx

47xx

48xx

49xx

50xx

51xx

52xx

53xx

54xx

55xx

56xx

57xx

58xx

59xx

60xx

61xx

62xx

63xx

64xx

65xx

66xx

67xx

68xx

69xx

70xx

71xx

72xx

73xx

74xx

75xx

76xx

77xx

78xx

79xx

80xx

81xx

82xx

83xx

84xx

85xx

86xx

87xx

88xx

89xx

90xx

91xx

92xx

93xx

94xx

95xx

96xx

98xx

99xx

190-00607-06 Rev D

Subsystem

Safety Monitor

Startup

GPS

UAT

Altitude

General Drawing

WX 500 (StrikeFinder)

SL30

Ryan TCAD

Radar

Traffic (Skywatch, IHAS, GTX)

WSI

TAWS

GDL 69

Basemap

Display Head

Option Menu

Annunciation Flags

GAMA 429

Weather (UAT/WSI)

GPS

Message

GDL 69

GDL 69 Weather

Traffic

Radar/TAWS

Charts (Jepp)

General Drawing

GDL 69 Audio

Traffic

Airports

Airspace

General Drawing

General Function Drawing

Charts

Terrain

Echo Tops (WSI)

Weather (UAT/WSI)

Flight Plan

Option Menu

Graphical METAR (UAT/WSI)

Basemap

IFR Map Function

Intersections

Lat/Lon Lines

Basemap

Custom Map Function

Message Function

Navaids

NDBs

Obstructions

Baro Correction popup

GDL 90 Code Edit

Radar

VFR Function

Traffic

Smart Key/Soft Key Menu

Split Screen Function

Lightning Function

TAWS Function

TFR (WSI)

VOR Drawing

Warning Areas (WSI)

FIS Function (GDL 69)

TAFS (WSI)

Option Menu

Configuration Module

Startup tasks

Traffic Subsystem