Garmin ECHOMAP PLUS 70 series Manual do Proprietário - Página 19

Procurar online ou descarregar pdf Manual do Proprietário para Sistema GPS marítimo Garmin ECHOMAP PLUS 70 series. Garmin ECHOMAP PLUS 70 series 50 páginas.
Também para Garmin ECHOMAP PLUS 70 series: Manual de início rápido (8 páginas), Manual de instruções de instalação (6 páginas)

Garmin ECHOMAP PLUS 70 series Manual do Proprietário
The 50 nearest destinations that contain your search criteria
appear.
4
Select the destination.

Selecting a Destination Using the Navigation Chart

From the Navigation chart, select a destination.

Searching for a Marine Services Destination

NOTE: This feature is available with premium charts, in some
areas.
The chartplotter contains information for thousands of
destinations offering marine services.
1
Select Nav Info.
2
Select Offshore Services or Inland Services.
3
If necessary, select the marine service category.
The chartplotter shows a list of the nearest locations and the
distance and bearing to each.
4
Select a destination.
You can select
or
to view additional information or to
show the location on a chart.

Setting and Following a Direct Course Using Go To

When using Go To, a direct course and a corrected course may
pass over land or shallow water. Use visual sightings, and steer
to avoid land, shallow water, and other dangerous objects.
You can set and follow a direct course from your current location
to a selected destination.
1
Select a destination
(Destinations, page
2
Select Navigate To > Go To.
A magenta line appears. In the center of the magenta line is
a thinner purple line that represents the corrected course
from your current location to the destination. The corrected
course is dynamic, and it moves with your boat when you are
off course.
3
Follow the magenta line, steering to avoid land, shallow
water, and other obstacles.
4
If you are off course, follow the purple line (corrected course)
to go to your destination, or steer back to the magenta line
(direct course).
You can also use the orange course-to-steer arrow, which
shows a proposed turning radius to return your boat to the
course.
Review the path for obstacles before negotiating the turn. If
the path is unsafe, reduce your boat speed and determine a
safe path back to the course.

Stopping Navigation

From the Navigation chart or Fishing chart, select MENU >
Stop Navigation.

Waypoints

Waypoints are locations you record and store in the device.
Waypoints can mark where you are, where you are going, or
where you have been. You can add details about the location,
such as name, elevation, and depth.

Marking Your Present Location as a Waypoint

From any screen, select MARK.

Creating a Waypoint at a Different Location

1
Select Nav Info > Waypoints > New Waypoint.
2
Select an option:
Navigation with a Chartplotter
WARNING
12).
WARNING
• To create the waypoint by entering position coordinates,
select Enter Coordinates, and enter the coordinates.
• To create the waypoint using a chart, select Use Chart,
select the location, and select SELECT.
• To create the waypoint using a range (distance) and
bearing, select Enter Range/Bearing, and enter the
information.

Marking an MOB Location

Select MARK > Man Overboard.
An international man overboard (MOB) symbol marks the active
MOB point and the chartplotter sets a direct course back to the
marked location.

Projecting a Waypoint

You can create a new waypoint by projecting the distance and
bearing from a different location. This can be helpful when
creating sail racing start and finish lines.
1
Select Nav Info > Waypoints > New Waypoint > Enter
Range/Bearing.
2
if necessary, select a reference point on the chart.
3
Select Enter Range/Bearing.
4
Enter the distance, and select Done.
5
Enter the bearing, and select Done.
6
Select Position.

Viewing a List of all Waypoints

Select Nav Info > Waypoints.

Editing a Saved Waypoint

1
Select Nav Info > Waypoints.
2
Select a waypoint.
3
Select Edit Waypoint.
4
Select an option:
• To add a name, select Name, and enter a name.
• To change the symbol, select Symbol.
• To change the depth, select Depth.
• To change the water temperature, select Water Temp..
• To change the comment, select Comment.
• To move the position of the waypoint, select Move.

Moving a Saved Waypoint

1
Select Nav Info > Waypoints.
2
Select a waypoint.
3
Select Review > Move.
4
Indicate a new location for the waypoint:
• To move the waypoint while using the chart, select Use
Chart, select a new location on the chart, and select
Move.
• To move the waypoint using coordinates, select Enter
Coordinates, and enter the new coordinates.
• To move the waypoint using a range (distance) and
bearing, select Enter Range/Bearing, and enter the
information.

Browsing for and Navigating to a Saved Waypoint

All route and navigation lines displayed on the chartplotter are
only intended to provide general route guidance or to identify
proper channels, and are not intended to be precisely followed.
Always defer to the navaids and conditions on the water when
navigating to avoid groundings or hazards that could result in
vessel damage, personal injury, or death.
WARNING
13