AEG KMK565000M Manual do utilizador - Página 11
Procurar online ou descarregar pdf Manual do utilizador para Forno AEG KMK565000M. AEG KMK565000M 40 páginas. Microwave combi-oven
Também para AEG KMK565000M: Manual do utilizador (36 páginas), Manual do utilizador (36 páginas), Manual do utilizador (36 páginas), Manual do utilizador (36 páginas), Manual do utilizador (36 páginas), Manual do utilizador (36 páginas)
Imprimir página
MICROWAVE
POWER
100 - 600 W
More than 600 W
6.5 Setting function:
Microwave Combi
You can combine the microwave function
with any of the heating functions.
1. Turn the knob for the heating
functions to select the function.
The display shows the default
temperature.
2. Turn the control knob to change the
temperature.
3. Press
with the microwave mode.
4. Turn the control knob to change the
microwave power settings. The
7. CLOCK FUNCTIONS
7.1 Clock functions table
Clock func-
tion
TIME OF DAY
DURATION
END
TIME DELAY
MINUTE
MINDER
MAXIMUM TIME
-
7 minutes
to combine heating function
Application
To show or change the
time of day. You can
change the time of day
only when the oven is off.
To set how long the oven
works. Use only when a
heating function is set.
To set when the oven
turns off. Use only when a
heating function is set.
Combination of DURA-
TION and END function.
Use to set a countdown
time. This function has no
effect on the operation of
the oven. You can set the
MINUTE MINDER at any
time, also if the oven is
off.
power setting changes in 100 W
steps.
Around 5 degrees before the set
temperature is reached the signal
sounds. When the set time ends the
signal sounds again and the oven stops.
5. Turn the knob for the heating
functions to the off position.
Microwave power is limited to 600 W
when you use the function:
Microwave Combi.
The oven can make noises when
using the function: Microwave
Combi. They are normal for this
function.
6.6 Heat-up indicator
When the oven function operates, the
bars in the display
when the temperature in the oven
increases, and disappear when it
decreases.
7.2 Setting and changing the
time
After the first connection to the mains,
wait until the display shows
"12:00". "12" flashes.
1. Turn the knob for the temperature to
set the hours.
2. Press
to confirm and set the
minutes.
The display shows
hour. "00" flashes.
3. Turn the knob for the temperature to
set the current minutes.
4. Press
to confirm or the set time of
day will be saved automatically after
5 seconds.
The display shows the new time.
To change the time of day press
again and again until the indicator for the
time of day
flashes in the display.
ENGLISH
11
appear one by one
and
and the set