A-Designs MP-2A Series Manual do Proprietário - Página 2

Procurar online ou descarregar pdf Manual do Proprietário para Amplificador A-Designs MP-2A Series. A-Designs MP-2A Series 9 páginas. Handcrafyed tube microphone preamplifier
Também para A-Designs MP-2A Series: Manual do Proprietário (14 páginas)

Imprimir página

WARNING!

Before you start your new MP-2A Series True Tube Microphone preamp please read the following:

ANY real tube product is sensitive to a high SPL environment. This may cause microphonics in a recording situation. Make sure you are able to shock

mount and or place the unit in isolation if need be. Direct light will also affect tubes, as well.

PLEASE, be sure to have at least one rack space between any tube products from the product above and below the unit. This will ensure your tube unit

will not over heat. Over heating will cause damage to the tubes and shorten their life span. If possible place, the MP-2A Series unit in the top rack space

to allow air flow.

If you have received your unit via UPS/Fed-Ex/DHL, or any other courier, your MP-A should have been double boxed for protection. If it was not double

boxed, please contact your dealer and return the unit to them for a replacement.

We demand ALL our units to be double boxed to help prevent damages during shipping.

Thank you,

Peter Montessi

President

A Designs Audio, Inc.

LEGAL NOTICE:

Fill out and Return Warranty Card to A Designs Audio, Inc. Warranty begins the day of purchase. Your name will be placed on our mailing list (unless

otherwise requested) for future updates and new product announcements.

A Designs Audio, Inc. reserves the right to make improvements or changes at any time to this product.

Published by: A Designs Audio, Inc.

P.O. Box 4255, West Hills, CA 91304 U.S.A.

Edition 4.0 2009

WARNING: Removing Cover Will Void Your Warranty.

One Year Limited Warranty Internal Parts, 30-Day Limited Warranty Labor, 30-Day Limited Warranty Tubes

A Designs Audio, Inc. warrants that our hardware conforms substantially to the specifications contained in this manual when used in accordance these

specifications for a period of one year from the date of original purchase from A Designs Audio, Inc. or its authorized dealers. In case of a valid warranty

claim, your sole and exclusive remedy and A Designs' entire liability under any theory of liability will be, at its option, to repair or replace the product

without charge, or, if not possible, to refund the purchase price to you. The warranty is not transferable and applies only to the original purchaser of the

product.

For warranty service, contact A Designs Audio, Inc. at 818-716-4153 to obtain a Return Merchandise Authorization (RMA) number.

Warranty is void if product serial numbers have been removed or if the product has been damaged by abuse or unauthorized modification and repair.

There are no user serviceable parts inside.

This warranty is in lieu of all warranties whether oral or written, expressed or implied. A Designs Audio, Inc. makes no other warranty either expressed

or implied, including without limitation, any implied warranties of merchantability, unless for a particular purpose or non-infringement. The purchasers'

sole and exclusive remedy under this warranty shall be repair or replacement as specified herein.

In no event will A Designs Audio, Inc. be liable for any direct, indirect, special, incremental or consequential damages resulting from any defect in the

product, including lost profits, damage to property and, to the extent permitted by law, damage for personal injury, even if A Designs Audio, Inc. has

been advised of the possibilities of such damages.

A Designs, A Designs Audio, Inc., and MP-2A are trademarks of A Designs Audio, Inc. All other trademarks are the property of their respective owners.