Garmin GPSMAP 8000 Series Manual do Proprietário - Página 41

Procurar online ou descarregar pdf Manual do Proprietário para Sistema GPS marítimo Garmin GPSMAP 8000 Series. Garmin GPSMAP 8000 Series 43 páginas. Installation instructions
Também para Garmin GPSMAP 8000 Series: Manual do Proprietário (36 páginas), Manual de início rápido (4 páginas), Manual de instruções (15 páginas), Manual de instruções de instalação (14 páginas)

Imprimir página

Garmin GPSMAP 8000 Series Manual do Proprietário

Other Vessels Settings

When your compatible chartplotter is connected to an AIS

device or VHF radio, you can set up how other vessels are

displayed on the chartplotter.

Select Settings > Other Vessels.

AIS: Enables and disables AIS signal reception.

DSC: Enables and disables digital selective calling (DSC).

Collision Alarm: Sets the collision alarm (Setting the Safe-Zone

Collision Alarm).

AIS-EPIRB Test: Enables test signals from Emergency Position

Indicating Radio Beacons (EPRIB).

AIS-MOB Test: Enables test signals from man overboard (MOB)

devices.

AIS-SART Test: Enables test transmissions from Search and

Rescue Transponders (SART).

Restoring the Original Chartplotter Factory

Settings

NOTE: This will delete all settings information you have entered.

Select Settings > System > System Information > Factory

Settings > Reset.

Communication with Wireless Devices

The chartplotters can create a wireless network to which you

can connect wireless devices.

Connecting wireless devices allows you to use Garmin apps,

including BlueChart Mobile and Garmin Helm

www.garmin.com

for more information.

Setting Up the Wi‑Fi

The chartplotters can create a Wi‑Fi network to which you can

connect wireless devices. The first time you access the wireless

network settings, you are prompted to set up the network.

Select Settings > Communications > Wi-Fi® Network >

Wi-Fi® > On > OK.

If necessary, enter a name for this wireless network.

Enter a password.

You will need this password to access the wireless network

from a wireless device. The password is case-sensitive.

Connecting a Wireless Device to the

Chartplotter

Before you can connect a wireless device to the chartplotter

wireless network, you must configure the chartplotter

wireless network

(Setting Up the Wi‑Fi

You can connect multiple wireless devices to the chartplotter to

share data.

From the wireless device, turn on the Wi‑Fi technology and

search for wireless networks.

Select the name of your chartplotter wireless network (Setting

Up the Wi‑Fi

Wireless Network).

Enter the network password.

Changing the Wireless Channel

You can change the wireless channel if you have trouble finding

or connecting to a device, or if you experience interference.

Select Settings > Communications > Wi-Fi® Network >

Advanced > Channel.

Enter a new channel.

You do not need to change the wireless channel of devices

connected to this network.

™

. See

Wireless Network

Wireless Network).

Changing the Wi‑Fi Host

You can change which chartplotter is serving as the Wi‑Fi host.

The can be helpful if you are having trouble with Wi‑Fi

communications. Changing the Wi‑Fi host allows you to select a

chartplotter that is physically closer to your mobile device.

Select Settings > Communications > Wi-Fi® Network >

Advanced > Wi-Fi® Host.

Follow the on-screen instructions.

Wireless Remote Control

Pairing the Wireless Remote Control With the

Chartplotter

Before you can use the wireless remote control with a

chartplotter, you must pair the remote with the chartplotter.

You can connect a single remote to multiple plotters, and then

press the pairing key to switch between the chartlotters.

Select Settings > Communications > Wireless Devices >

Wireless Remote.

Select New Connection.

Follow the on-screen instructions.

Turning On and Off the Remote Backlight

Turning off the remote backlight can significantly increase the

battery life.

On the chartplotter, select Settings > Communications >

Wireless Devices > Wireless Remote > Backlight.

Follow the on-screen instructions.

Disconnecting the Remote from All Chartplotters

On the chartplotter, select Settings > Communications >

Wireless Devices > Wireless Remote > Disconnect All.

Follow the on-screen instructions.

Using the Garmin Helm Application with the

Chartplotter

Before you can control the chartplotter with the Garmin Helm

application, you must download and install the application, and

connect the chartplotter to a Wi‑Fi router.

Select Settings > Communications > Wireless Devices >

Helm App.

Select an option.

Use the application to view or control the chartplotter.

Chartplotter Data Management

Copying Waypoints, Routes, and Tracks

from HomePort to a Chartplotter

Before you can copy data to the chartplotter, you must have the

latest version of the HomePort software program loaded on your

computer and a memory card installed in the chartplotter.

Copy the data from HomePort to the prepared memory card.

For more information, see the HomePort help file.

Selecting a File Type for Third-Party

Waypoints and Routes

You can import and export waypoints and routes from third-party

devices.

Select Info > User Data > Data Transfer > File Type.

Select GPX.

To transfer data with Garmin devices again, select the ADM file

type.

Communication with Wireless Devices