Garmin GPSMAP 8215 MFD Manual do Proprietário - Página 8
Procurar online ou descarregar pdf Manual do Proprietário para Sistema GPS marítimo Garmin GPSMAP 8215 MFD. Garmin GPSMAP 8215 MFD 36 páginas. Installation instructions
Também para Garmin GPSMAP 8215 MFD: Manual de início rápido (4 páginas), Manual de instruções (15 páginas)
Imprimir página
• To change the type of data shown on the page, select
Overlays > Data, select an option, and follow the on-
screen instructions to change the data shown.
Resetting the Station Layouts
You can restore the factory default layouts for all stations.
Select Settings > System > Station Information > Reset
Layouts.
Adjusting the Backlight
1
Select Settings > System > Beeper and Display >
Backlight.
TIP: Press
from any screen to access the backlight
settings.
2
Select an option:
• Adjust the backlight level.
• Select Enable Auto Backlight or Auto.
Adjusting the Color Mode
1
Select Settings > System > Beeper and Display > Color
Mode.
2
Select an option.
Charts and 3D Chart Views
The chartplotters have a basic imagery map. The charts and 3D
chart views listed below are available on the chartplotter. The
charts and views that are available depend on the map data and
accessories used.
You can access the charts and chart views by selecting Charts.
Navigation Chart: Shows navigation data available on your
pre-loaded maps and from supplemental maps, if available.
The data includes buoys, lights, cables, depth soundings,
marinas, and tide stations in an overhead view.
Perspective 3D: Provides a view from above and behind the
boat (according to your course) and provides a visual
navigation aid. This view is helpful when navigating tricky
shoals, reefs, bridges, or channels, and is beneficial when
trying to identify entry and exit routes in unfamiliar harbors or
anchorages.
Mariner's Eye 3D: Shows a detailed, three-dimensional view
from above and behind the boat (according to your course)
and provides a visual navigation aid. This view is helpful
when navigating tricky shoals, reefs, bridges, or channels,
and when trying to identify entry and exit routes in unfamiliar
harbors or anchorages.
NOTE: Mariner's Eye 3D and Fish Eye 3D chart views are
available with premium charts, in some areas.
Fish Eye 3D: Provides an underwater view that visually
represents the sea floor according to the chart information.
When a sonar transducer is connected, suspended targets
(such as fish) are indicated by red, green, and yellow
spheres. Red indicates the largest targets and green
indicates the smallest.
NOTE: Mariner's Eye 3D and Fish Eye 3D chart views are
available with premium charts, in some areas.
Fishing Chart: Provides a detailed view of the bottom contours
and depth soundings on the chart. This chart removes
navigational data from the chart, provides detailed
bathymetric data, and enhances bottom contours for depth
recognition. This chart is best for offshore deep-sea fishing.
NOTE: The offshore Fishing chart is available with premium
charts, in some areas.
Radar Overlay: Superimposes radar information on the
Navigation chart or the Fishing chart, when the chartplotter is
2
connected to a radar. This feature is not available with all
models.
Chart Symbols
This table contains some of the common symbols you might see
on the detailed charts.
Icon
Description
Buoy
Information
Marine services
Tide station
Current station
Overhead photo available
Perspective photo available
Other features common to most charts include depth contour
lines (with deep water represented in white), intertidal zones,
spot soundings (as depicted on the original paper chart),
navigational aids and symbols, obstructions, and cable areas.
Showing a Different Chart
1
From a chart or 3D chart view, select Menu > Chart Menu >
Change Chart.
2
Select a chart or 3D chart view.
Zooming In and Out Using the Touchscreen
You can quickly zoom in and out of many screens, such as the
charts and sonar views.
• Pinch two fingers together to zoom out.
• Spread two fingers apart to zoom in.
Viewing Location and Object Information on
a Chart
You can view information about a location or an object on the
Navigation chart or the Fishing chart.
NOTE: The offshore Fishing chart is available with premium
charts, in some areas.
1
From the Navigation chart or Fishing chart, select a location
or object.
A list of options appears along the right side of the chart. The
options that appear vary based on the location or object you
selected.
2
Select an option:
• To view details of objects in the vicinity of the cursor,
select Review.
NOTE: Review does not appear if the cursor is not near
an object. If the cursor is near only one object, the name
of the object appears.
• To navigate to the selected location, select Navigate To.
• To mark a waypoint at the cursor location, select Create
Waypoint.
• To view the distance and bearing of the object from your
current location, select Measure Distance.
The distance and bearing appear on the screen. Select
Set Reference to measure from a location other than
your current location.
• To view tide, current, celestial, chart notes, or local
services information near the cursor, select Information.
Charts and 3D Chart Views