Garmin 190-01168-02 Manual de instruções de instalação - Página 5
Procurar online ou descarregar pdf Manual de instruções de instalação para Equipamento marítimo Garmin 190-01168-02. Garmin 190-01168-02 8 páginas. Garmin digital marine instrument display installation instructions
Imprimir página
Connecting the GMI 10 through NMEA 0183
The GMI 10 can receive NMEA 0183 data from one device. The GMI 10 displays the received data, but cannot transmit
the data to another NMEA 0183 device or transmit the data to a NMEA 2000 network.
Use the diagrams to wire a NMEA 0183 device to your GMI 10. Use 22 AWG, shielded, twisted-pair wiring for
extended runs of wire. Solder all connections and seal them with heat-shrink tubing.
GMI 10
Device
GMI 10
Device
GMI 10
Device
Notes:
•
Consult the instructions for your NMEA 0183-compliant device to identify the Tx/A(+) and Tx/ B(-) wires.
•
When connecting NMEA 0183 devices with two transmitting and two receiving lines, it is not necessary for the
NMEA 2000 bus and the NMEA 0183 device to connect to a common ground.
•
The yellow (accessory on) wire and the black (accessory ground) wire are used only when wiring the GMI 10 to a
Garmin GPS 17/17x antenna.
GMI 10 Installation Instructions
GMI 10 Data Cable
WIRE
COLOR
Fuse
1 A
BLACK
YELLOW
BLUE
>
WHITE
>
BROWN
>
GREEN
>
Wiring the GMI 10 to a GPS 17x NMEA 0183 HVS Antenna
WIRE
COLOR
BROWN
>
GREEN
>
Wiring the GMI 10 to a Standard NMEA 0183 Device
Color
Black
Yellow
Blue
>
White
>
Brown
>
Green
>
-
+
Battery
12 Vdc
RED
-
+
Battery
12 Vdc
POWER GND
Function
Accessory Off(-)
Accessory On(+)
Tx/A(+)
Tx/B(-)
Rx/A(+)
Rx/B(-)
WIRE
COLOR
RED
BLACK
ORANGE
WHITE
>
WHITE/
ORANGE
>
GRAY
>
WHITE/
RED
>
WIRE
FUNCTION
POWER
Compliant Device
Tx/A (+)
>
Tx/B (-)
>
GPS 17/17x
NMEA 0183
HVS Antenna
NMEA 0183