Garmin Fishfinder 300C Manual de início rápido - Página 9

Procurar online ou descarregar pdf Manual de início rápido para Equipamento marítimo Garmin Fishfinder 300C. Garmin Fishfinder 300C 25 páginas. Garmin fish finder - fishfinder user manual
Também para Garmin Fishfinder 300C: Manual de instruções de instalação (8 páginas), Informações de segurança importantes (48 páginas), Modelo (1 páginas), (Espanhol) Manual de início rápido (24 páginas)

•

Surface Noise—shows or hides the sonar returns near the surface of the water. Hide

surface noise to help reduce visual clutter.

•

Whiteline—highlights the strongest signal from the bottom to help identify the

hardness or softness of the targets.

strong returns are highlighted in white. With a

are highlighted in white.

•

Keel Offset (visible only if a speed wheel is not attached; see Transducer, below, if

a speed wheel is attached)—offsets the surface reading for the depth of a keel so you

can measure depth from the bottom of the boat keel instead of from the transducer.

Enter a positive number to offset for a keel. You can enter a negative number to

compensate for a large vessel that may draw several feet of water. Use the

to adjust the offset, then press SELECT.

Transducer at Surface

Transducer at Bottom

enter a (-) negative number to

show depth from the surface.

•

Transducer (visible only if a speed wheel is attached)—Select

for the depth of a keel. Set as described above.

Select

Calibrate Water Speed

speed wheel. Follow the on-screen directions for calibration.

•

Numbers—shows or hides water temperature, water speed (if you have a speed-

sensing transducer or a separate speed wheel), and battery voltage.

Fishfinder 300C Quick Start Manual

enter a (+) positive number

to show the depth from the

bottom of keel.

of Keel

to calibrate a speed-sensing transducer or separate

High

is the most sensitive setting. Almost all

Low

setting, only the strongest returns

ROCKER

Keel Offset

to offset