Garmin GMR FANTOM OPEN ARRAY Series Manual de instruções de instalação - Página 11
Procurar online ou descarregar pdf Manual de instruções de instalação para Equipamento marítimo Garmin GMR FANTOM OPEN ARRAY Series. Garmin GMR FANTOM OPEN ARRAY Series 19 páginas.
Imprimir página
Connecting a Garmin Marine Network Cable
1 Route one end of the Garmin Marine Network cable to the radar.
NOTE: The included Garmin Marine Network cable uses a 90-degree connector to connect to the NETWORK
port on the radar housing so that it fits correctly behind the radar door. If you do not plan to install the door
on the radar housing, you can purchase a Garmin Marine Network cable with a straight connector from your
Garmin dealer.
2 Connect the cable to the NETWORK port on the radar.
Use caution when connecting the cable to the radar. If you attempt to connect the cable at an angle, you may
damage the pins on the NETWORK port.
3 Turn the ring on the cable clockwise to secure the cable to the radar.
Installing a Garmin Marine Network Adapter Cable
If necessary, you can use the included Garmin Marine Network adapter cable to connect this device to your
chartplotter or GMS 10 network port expander.
1 Connect the Garmin Marine Network cable to the device, and route it to your chartplotter or port expander.
2 If it is not already pre-installed, connect the included adapter to the end of the Garmin Marine Network cable.
3 Connect the adapter cable to your chartplotter or port expander.
NOTICE
11