AEG FAV55BVI2P Manual do utilizador - Página 24

Procurar online ou descarregar pdf Manual do utilizador para Máquina de lavar loiça AEG FAV55BVI2P. AEG FAV55BVI2P 28 páginas.

Imprimir página

www.aeg.com

Problem

There are whitish streaks or

bluish layers on glasses and

dishes.

There are stains and dry water

drops on glasses and dishes.

The interior of the appliance is

wet.

Unusual foam during washing. • Use the detergent designed specifically for dishwash-

Traces of rust on cutlery.

There are residues of deter-

gent in the dispenser at the

end of the programme.

Odours inside the appliance.

Limescale deposits on the ta-

bleware, on the tub and on

the inside of the door.

Possible cause and solution

• The released quantity of rinse aid is too high. Adjust

the rinse aid level to a lower level.

• The quantity of detergent is too high.

• The released quantity of rinse aid is not sufficient. Ad-

just the rinse aid level to a higher level.

• The quality of the rinse aid can be the cause.

• This is not a defect of the appliance. Humid air con-

densates on the appliance walls.

ers.

• There is a leak in the rinse aid dispenser. Contact an

Authorised Service Centre.

• There is too much salt in the water used for washing.

Refer to "The water softener".

• Silver and stainless steel cutlery were placed together.

Do not put silver and stainless steel items close to-

gether.

• The detergent tablet was stuck in the dispenser and

therefore was not completely washed away by water.

• Water cannot wash away the detergent from the dis-

penser. Make sure that the spray arms are not blocked

or clogged.

• Make sure that items in the baskets do not impede the

lid of the detergent dispenser from opening.

• Refer to "Internal cleaning".

• Start the Machine Care programme with a descaler or

a cleaning product designed for dishwashers.

• The level of salt is low, check the refill indicator.

• The cap of the salt container is loose.

• Your tap water is hard. Refer to "The water softener".

• Use salt and set regeneration of the water softener

even when multi-functional tablets are used. Refer to

"The water softener".

• Start the Machine Care programme with a descaler

designed for dishwashers.

• If limescale deposits still remain, clean the appliance

with appliance cleaners which are particularly suitable

for this purpose.

• Try a different detergent.

• Contact the detergent manufacturer.