Garmin GPSMAP 8000 Glass Helm Series Manual de instruções - Página 31

Procurar online ou descarregar pdf Manual de instruções para Equipamento marítimo Garmin GPSMAP 8000 Glass Helm Series. Garmin GPSMAP 8000 Glass Helm Series 48 páginas.

Imprimir página

Garmin GPSMAP 8000 Glass Helm Series Manual de instruções

Select an option:

• To calculate the vessel speed based on data from the

water-speed sensor, select Water Speed.

• To calculate the vessel speed based on GPS data, select

GPS Speed.

Configuring the Heading Source of the Wind Gauge

You can specify the source of the heading displayed on the

wind gauge. Magnetic heading is the heading data received

from a heading sensor, and GPS heading is calculated by your

chartplotter GPS (course over ground).

From the wind gauge, select Menu > Compass Gauge >

Heading Source.

Select GPS Hdg or Magnetic.

NOTE: When moving at low speeds or when stationary, the

magnetic compass source is more accurate than the GPS

source.

Customizing the Close-Hauled Wind Gauge

You can specify the range of the close-hauled wind gauge for

both the upwind scale and the downwind scale.

From the wind gauge, select Menu > Compass Gauge >

Set Gauge Type > Close Hauled Gauge.

Select an option:

• To set the maximum and minimum values that appear

when the upwind close-hauled wind gauge appears,

select Change Upwind Scale, and set the angles.

• To set the maximum and minimum values that appear

when the downwind close-hauled wind gauge appears,

select Change Downwind Scale, and set the angles.

• To view true or apparent wind, select Wind, and select an

option.

Viewing Graphs

Before you can view graphs of various environmental changes,

such as temperature, depth, and wind, you must have an

appropriate transducer or sensor connected to the network.

Select Info > Trip & Graphs > Graphs.

Setting the Graph Range and Time Scales

You can indicate the amount of time and the range of depth that

appear in the depth and water temperature graphs.

From a graph, select Graph Setup.

Select an option:

• To set a time-elapsed scale, select Duration. The default

setting is 10 minutes. Increasing the time-elapsed scale

allows you to view variations over a longer period of time.

Decreasing the time-elapsed scale allows you to view

more detail over a shorter period of time.

• To set the graph scale, select Scale. Increasing the scale

allows you to view more variation in readings. Decreasing

the scale allows you to view more detail in the variation.

Tide, Current, and Celestial

Information

Tide Station Information

You can view information about a tide station for a specific date

and time, including the tide height, and when the next high and

low tides will occur. By default, the chartplotter shows tide

information for the most recently viewed tide station and for the

present date and time.

Select Info > Tides & Currents > Tides.

Tide, Current, and Celestial Information

Current Station Information

NOTE: Current station information is available with certain

detailed maps.

You can view information about a current station for a specific

date and time, including the current speed and level of the

current. By default, the chartplotter shows current information

for the most recently viewed current station and for the present

date and time.

Select Info > Tides & Currents > Currents.

Celestial Information

You can view information about sunrise, sunset, moonrise,

moonset, moon phase, and the approximate sky view location

of the sun and moon. The center of the screen represents the

sky overhead, and the outermost rings represent the horizon.

By default, the chartplotter shows celestial information for the

present date and time.

Select Info > Tides & Currents > Celestial.

Viewing Tide Station, Current Station, or

Celestial Information for a Different Date

Select Info > Tides & Currents.

Select Tides, Currents, or Celestial.

Select an option.

• To view information for a different date, select Change

Date > Manual, and enter a date.

• To view information for today, select Change Date >

Current.

• If available, to view information for the day after the date

shown, select Next Day.

• If available, to view information for the day before the date

shown, select Previous Day.

Viewing Information for a Different Tide or

Current Station

Select Info > Tides & Currents.

Select Tides or Currents.

Select Nearby Stations.

Select a station.

Viewing Almanac Information from the

Navigation Chart

From a chart or 3D chart view, select a location.

Select Information.

Select Tides, Currents, or Celestial.

Sailing Features

Setting the Vessel Type

You can select your boat type to configure the chartplotter

settings and to use features customized for your boat type.

Select Settings > My Vessel > Vessel Type.

Select Powerboat or Sailboat.

Laylines Settings

When in sailing mode

(Setting the Vessel

display laylines on the navigation chart. Laylines can be very

helpful when racing.

From the navigation chart, select Menu > Chart Menu >

Laylines.

Type), you can