Garmin gWind Instruções de instalação

Procurar online ou descarregar pdf Instruções de instalação para Equipamento marítimo Garmin gWind. Garmin gWind 4 páginas. Provides wireless wind speed and wind angle information
Também para Garmin gWind: Manual de instruções de instalação (46 páginas)

Imprimir página

gWind™ Wireless Installation

Instructions

gWind™ provides wireless wind speed and wind angle

information to a NMEA 2000

transducer transmits information to a Wireless Server Interface

(WSI), which must connect to a Garmin

data to a NMEA 2000 network.

Important Safety Information

See the Important Safety and Product Information guide in the

product box for product warnings and other important

information.

Always wear safety goggles, ear protection, and a dust mask

when drilling, cutting, or sanding.

Use caution when working from heights.

Battery Warnings

If these guidelines are not followed, the battery may experience

a shortened life span or may present a risk of damage to the

device, fire, chemical burn, electrolyte leak, and/or injury.

• Do not disassemble, modify, remanufacture, puncture, or

damage the device or batteries.

• Do not immerse or expose the device or batteries to water or

other liquids, fire, explosion, or other hazard.

• Do not use a sharp object to remove batteries.

• Keep batteries away from children.

• Only replace batteries with correct replacement batteries.

Using other batteries presents a risk of fire or explosion. To

purchase replacement batteries, see your Garmin dealer or

the Garmin website.

• Do not operate the device outside of the following

temperature range: from -20° to 50°C (from -4° to 122°F).

• When storing the device for an extended time period, store

within the following temperature range: from 0° to 35°C (from

32° to 95°F).

• Contact your local waste disposal department to dispose of

the device/batteries in accordance with applicable local laws

and regulations.

Registering Your Device

Help us better support you by completing our online registration

today.

• Go to my.garmin

• Keep the original sales receipt, or a photocopy, in a safe

place.

Installing the Battery

The appropriate battery is provided with this device. Installing a

battery not provided by or purchased from Garmin may damage

the device.

Before mounting the device, you must install the included

battery.

Using a #2 Phillips screwdriver, open the battery door on the

device.

Insert the connector from the battery

board inside the device

network on your boat. The wind

GND™ 10 to send the

WARNING

CAUTION

WARNING

NOTICE

to the port on the

The connector fits into the port only one way. Forcing the

connector into the port may damage it.

Route the battery cable inside the device housing

place the battery under the board

Taking care to avoid pinching the battery wires, close and

secure the battery door.

Installing the Propeller

Ensure the shaft

lines up correctly with the slot on the

propeller.

The socket on the propeller fits only one way on the shaft.

Press on the propeller until it is seated on the device.

Install the set screw

device.

Mounting Considerations

When selecting a mounting location for the wind transducer,

observe these considerations.

• The wind transducer should be mounted on a horizontal

surface on the mast head

to hold the propeller securely to the

, and