AEG FAVORIT 44080 I Manual do utilizador - Página 31
Procurar online ou descarregar pdf Manual do utilizador para Máquina de lavar loiça AEG FAVORIT 44080 I. AEG FAVORIT 44080 I 40 páginas. Electrolux user instructions dishwasher favorit 44080 i
Também para AEG FAVORIT 44080 I: Informações do utilizador (48 páginas), Informações do utilizador (40 páginas)
Imprimir página
Connecting the dishwasher
Connecting to the water supply
• The dishwasher can be connected to cold and hot water supplies up to max.
60°C.
• The dishwasher must not be connected to open hot water appliances or in
stantaneous water heaters.
Permitted water pressure
Lowest permitted water pressure:
0,1 MPa ( = 1 bar = 10 N/cm
Highest permitted water pressure:
1 MPa ( = 10 bar = 100 N/cm
Connecting the inlet hose
The water inlet hose must not be kinked, crushed or entangled when it is being
connected.
Connect the threaded hose fitting (ISO 228 1:2000) on the water inlet hose to a
tap with an external thread (¾ inch). The inlet hose is fitted with either a plastic
or a metal nut:
– Only tighten the nut hand tight.
Then do a visual check for water tightness. (Make sure that the tap is not drip
ping.)
So that access to the tap in the kitchen is not restricted by the use of the dish
washer, we recommend installing an additional tap, or fitting a T branch to the
existing tap.
WARNING! Dangerous voltage
(This does apply to dishwashers with safety
valve).
The electrical cable for the safety valve is in
the double walled water inlet hose and is
live.
Therefore do not immerse the water inlet
hose or the safety valve in water.
Consult your plumber if the water pressure is
2
)
less than 0,1 MPa.
If the water pressure is greater than
1 MPa, a pressure reduction valve must be used
2
)
(available from your dealer).
Connecting the dishwasher
31