Garmin GTX 330 Mode S Manual de Operação do Piloto e Manual de Voo de Avião Aprovado pela Faa - Página 7
Procurar online ou descarregar pdf Manual de Operação do Piloto e Manual de Voo de Avião Aprovado pela Faa para Rádio marítimo Garmin GTX 330 Mode S. Garmin GTX 330 Mode S 8 páginas.
Imprimir página
Cirrus Design
SR20
CRSR key during code entry will remove the cursor and cancel the
entry.
When making routine code changes, avoid inadvertent
selection of code 7500 and all codes within the 7600 series
(7600 – 7677) and 7700 series (7700 – 7777). These codes
trigger special indicators in automated facilities. 7500 will be
decoded as the hijack code.
Important Codes
• 1200 – VFR code for any altitude in U.S.
• 7000 – VFR code commonly used in Europe
• 7500 – Hijacking
• 7600 – Loss of communications
• 7700 – Emergency
• 7777 – Military interceptor operations (Never squawk this code)
• 0000 – Military use only (Not enterable)
Function Keys
IDENT Key
Pressing the IDENT button activates the Special Position Identification
(SPI) pulse for approximately 18 seconds allowing ATC to identify your
transponder return from other returns on the controller's scope. The
Reply annunciator in the display will illuminate during the SPI pulse.
Momentarily press the IDENT key when the controller requests,
"SQUAWK IDENT."
VFR Key
Pressing the VFR key sets the transponder to the pre-programmed
VFR code selected in the Configuration Mode (factory set to 1200).
Pressing the VFR key a second time will restore the previous
identification code.
FUNC Key
Pressing the FUNC key changes the data shown on the right side of
the display. Pressing the FUNC key a second time will cycle the
display to the next data. Displayed data includes Pressure Altitude,
P/N 11934-S28
Original: 07-03-04
• Note •
Section 9
Supplements
7 of 8