Garmin GTX 335 Series Manual do Piloto - Página 32
Procurar online ou descarregar pdf Manual do Piloto para Rádio marítimo Garmin GTX 335 Series. Garmin GTX 335 Series 36 páginas. All-in-one ads-b transponder
7.2 Transponder System Messages
NOTE
Messages are not high priority. Their purpose is to provide additional
information on abnormal system behavior. They do not require immediate pilot
action. Any transponder failure will immediately display an alert with no pilot
action necessary to view the alert.
Depending on configuration, active messages display in the bottom left hand corner of
the screen either as a flashing or solid MSG. If the MSG text is configured to flash, the text
stops flashing when all active messages are read.
To view new messages:
1. Press FUNC key to SYS group.
2. Press CRSR then ENT key to view message.
SYSTEM MESSAGE
1090 ADS-B In Failed
1090 ADS-B Out Failed The unit cannot transmit ADS-B
ADS-B In Failed
ADS-B In Traffic
Alerting Failed
7-2
Table 7-1 Troubleshooting
EXPLANATION
The GTX 3X5 has detected a
1090 receiver fault. Traffic
picture may not be complete.
messages.
Note: This message is present
regardless of whether 1090 ES is
on or off.
The GTX 3X5 has detected a
fault in both 1090 and UAT
receivers. ADS-B IN traffic
and FIS-B will not be available.
The GTX 3X5 does not have
enough information to
provide traffic alerting on
ADS-B targets.
GTX 335/345 Pilot's Guide
FLIGHT CREW ACTION
Contact dealer for service.
Contact dealer for service.
Contact dealer for service.
1. Check power and/or circuit breaker
for the GPS position source
(e.g., GTN or GNS).
2. Make sure the GPS antenna has a
clear view of the sky and provide
enough time for the GPS position
source to obtain a position fix.
Extended periods between use or
GPS position source disconnection
from the aircraft battery could
cause a longer than normal GPS
satellite acquisition time. If
problem persists, contact dealer for
service.
190-01499-00 Rev. C