AEG FAVORIT 44860 Livro de instruções - Página 34
Procurar online ou descarregar pdf Livro de instruções para Máquina de lavar loiça AEG FAVORIT 44860. AEG FAVORIT 44860 48 páginas. Aeg dishwasher favorit
Imprimir página
Operating instructions
What to do, when...
Certain problems are due to the lack of simple maintenance or
oversights, which can be solved with the help of the instructions given
here, without calling out an engineer.
...a flashing fault code appears
The intervention of an alarm is indicated by:
- indicator light of the programme in progress is flashing
- a fault code visible in the digital display.
Open the door and carry out the following suggested corrective
actions (see following chart).
Fault code / Malfunction
- Indicator light of the
programme in progress
is flashing
- in the digital display
appears
The machine does not fill
with water
- Indicator light of the
programme in progress
is flashing
- in the digital display
appears
The dishwasher will not
drain
- Indicator light of the
programme in progress
is flashing
- in the digital display
appears
Once the checks have been carried out, to continue the programme,
close the door and press the button of the programme that was
running before the intervention of the alarm. The programme will
continue from the point at which it was interrupted. If the fault code
reappears contact your local Service Force Centre.
For other fault codes not described in the above chart will appear,
please contact your Service Force Centre.
34
Possible cause
The water tap is blocked or
furred with limescale.
The water tap is turned off.
The filter (where present) in
the threaded hose fitting at
the water inlet valve is
blocked.
The water inlet hose has not
been correctly laid or it is
bent or squashed.
The sink spigot is blocked.
The water drain hose has not
been correctly laid or it is
bent or squashed.
Anti-flood device is activated.
Solutions
Clean the water tap.
Turn the water tap on.
Clean the filter in the
threaded hose fitting.
Check the water inlet hose
connection.
Clean out the sink spigot.
Check the water drain
hose connection.
Close the water tap and
contact the Service Force
Centre.