Garmin VHF 315 Series Manual do Proprietário - Página 25

Procurar online ou descarregar pdf Manual do Proprietário para Rádio marítimo Garmin VHF 315 Series. Garmin VHF 315 Series 32 páginas.
Também para Garmin VHF 315 Series: Manual de instruções de instalação (6 páginas), Manual de instruções de instalação (15 páginas)

Imprimir página

Garmin VHF 315 Series Manual do Proprietário

When you connect the radio to a NMEA 0183 device or a NMEA 2000 network, you can transfer received DSC

distress and position information to any compatible connected chartplotter

The radio can also receive GPS-position information from a NMEA 0183 device or a NMEA 2000 network.

Received GPS-position information appears on the home screen and is transmitted with DSC calls.

on the screen when GPS data is available, and flashes when GPS data is not present. When GPS data is not

present, you must enter your position manually

For more information on connecting the radio to a NMEA 0183 device or a NMEA 2000 network, see the

Installation Instructions.

Additional Functionality with Other Garmin Devices

The radio has additional capabilities when you connect it to other Garmin devices, such as a chartplotter.

NOTE: You may need to upgrade your Garmin chartplotter software to use NMEA 0183 or NMEA 2000 features.

When you connect the radio to a Garmin chartplotter using either NMEA 0183 or NMEA 2000, your chartplotter

keeps track of the current and previous positions of the contacts in the directory.

When you connect the radio to the same NMEA 2000 network as a Garmin chartplotter, you can use the

chartplotter to set up an individual routine call.

When you connect the radio to the same NMEA 2000 network as a Garmin chartplotter, and you initiate a man-

overboard distress call from the radio, the chartplotter prompts you to navigate to the man-overboard location.

If you connect a Garmin autopilot system to the same NMEA 2000 network, the chartplotter prompts you to

start a Williamson's turn to the man-overboard location.

Communicating Over NMEA 0183 or NMEA 2000

NOTE: This feature is not available on all models.

You can select a connection either to a NMEA 0183 device or to a NMEA 2000 network. The radio can

communicate over only one communication protocol at a time.

1 Select MENU > COMMUNICATIONS > PROTOCOL.

2 Select NMEA0183 or NMEA2000.

Configuring DSC NMEA Transmissions

You can filter the types of DSC-call data the radio sends to a connected NMEA 0183 device or over a NMEA

2000 network.

1 Select MENU > COMMUNICATIONS > DSC OUTPUT.

2 Select an option:

• To send NMEA data when you receive a DSC call from any MMSI number, select ALL VESSELS, and

proceed to the last step.

• To disable sending NMEA data when you receive a DSC call, select NO VESSELS, and proceed to the last

step.

• To send NMEA data only when you receive a call from a vessel in your directory, select SELECT VESSELS,

and proceed to the next step.

NOTE: When you configure the radio for SELECT VESSELS, all received DSC-distress-call data is sent over

NMEA, even if the vessel is not in your directory.

3 Select a vessel in your directory.

4 Select an option:

• To send all DSC-call data from this vessel, select ON.

• To send DSC-distress-call data only from this vessel, select OFF.

5 Repeat this process for each vessel in your directory.

6 Select BACK to save your changes and exit the menu.

NMEA 0183 and NMEA 2000

(Manual Position Information, page

(NMEA, page

24).

19).

appears