Garmin Alpha 200i Manual do Proprietário - Página 17
Procurar online ou descarregar pdf Manual do Proprietário para Produtos para animais de estimação Garmin Alpha 200i. Garmin Alpha 200i 29 páginas. With training
Imprimir página
2
Select a track.
3
Select
.
The beginning and the end of the track are marked by flags.
4
Select the information bar along the top of the screen.
Information about the track is listed.
Viewing the Elevation Plot of a Track
1
Select Track Manager.
2
Select a track.
3
Select
.
Navigating to the Start of a Track
You can navigate back to the beginning of a track. This can be
helpful when finding your way back to camp or the trail head.
1
Select Track Manager > My Track >
2
Select TracBack.
Changing the Track Color
1
Select Track Manager.
2
Select a track.
3
Select
> Color.
4
Select a color.
Saving the Current Track
1
From the main menu, select Track Manager.
2
Select My Track > Save.
Clearing the Current Track
Select Track Manager > My Track > Discard.
Deleting a Track
1
Select Track Manager.
2
Select a track.
3
Select
> Delete.
Navigation
You can navigate routes and tracks to a waypoint, geocache, or
any saved location in the device. You can use the map or the
compass to navigate to your destination.
Map
represents your location on the map. As you travel, the icon
moves and leaves a track log. Waypoint names and symbols
appear on the map. When you are navigating to a destination,
your route is marked with a line on the map.
When the map orientation is Track Up, objects on the map
appear to rotate around your position. As you travel, the entire
map reorients in the direction you are facing. You can stabilize
the objects by setting the orientation to North Up
page
15).
To open the map, select
Measuring Distance on the Map
You can measure the distance between two locations.
1
From the map, select a location.
2
Select
> Measure Distance > Use.
3
Move the pin to another location on the map.
Compass
The handheld device has a 3-axis, tilt-compensated compass.
You can use a bearing pointer or a course pointer to navigate to
your destination.
Navigation
.
(Map Settings,
.
Calibrating the Compass
Calibrate the electronic compass outdoors. To improve heading
accuracy, do not stand near objects that influence magnetic
fields, such as vehicles, buildings, and overhead power lines.
You should calibrate the compass after moving long distances,
experiencing temperature changes, or removing the battery.
1
Select Compass >
> Calibrate Compass > Start.
2
Follow the on-screen instructions.
Navigating with the Bearing Pointer
When navigating to a destination,
regardless of the direction you are moving.
1
While navigating to a destination, select Compass.
2
Turn until
points toward the top of the compass, and
continue moving in that direction to the destination.
Where To? Menu
You can use the Where To? menu to find a destination to
navigate to. Not all Where To? categories are available in all
areas and maps.
Finding a Waypoint by Name
1
Select Navigation > Where To? > Waypoints >
Search.
2
Enter the name.
3
Select
.
Navigating with Sight 'N Go
You can point the device at an object in the distance, lock in the
direction, and navigate to the object.
1
Select Navigation > Compass >
2
Point the device at an object.
3
Select Lock Direction > Set Course.
Elevation Plot
By default, the elevation plot displays the elevation for an
elapsed time.
To open the elevation plot, select Track Manager > My Track >
.
Calibrating the Barometric Altimeter
You can calibrate the barometric altimeter manually if you know
the correct elevation or the correct barometric pressure.
1
Go to a location where the elevation or barometric pressure
is known.
2
Select Track Manager > My Track >
Setup > Calibrate Altimeter.
3
Follow the on-screen instructions.
Navigating to a Point on the Plot
1
Select Track Manager > My Track >
2
Select an individual point on the plot.
3
Select
> View Map.
4
Select Go.
Changing the Plot Type
You can change the elevation plot to display pressure and
elevation over time or distance.
1
Select Track Manager > My Track >
Setup > Plot Type.
2
Select an option.
NOTICE
points to your destination,
> Sight 'N Go.
>
> Altimeter
.
>
> Altimeter
> Spell
13