AEG FAVORIT 64570 Vi Informações do utilizador - Página 38
Procurar online ou descarregar pdf Informações do utilizador para Máquina de lavar loiça AEG FAVORIT 64570 Vi. AEG FAVORIT 64570 Vi 48 páginas. Aeg the fully integratable dishwasher
Também para AEG FAVORIT 64570 Vi: Informações do utilizador (44 páginas)
Imprimir página
Connecting to the water supply
Inlet
• Water pressure: 1–10 bar (flow pressure)
• The appliance can be connected to cold and hot water, maximum
temperature 65 °C.
• The site must provide a regulating tap with G 3/4" outlet.
• The appliance must be connected with the plastic pressure hose sup-
plied (with filter, in accordance with EN61770, 10 bar.)
• Installation of an IRG filter is recommended as part of the house's
water system.
• After the regulating tap is opened, no water may leak out of the con-
nection fittings.
• If connecting to the hot water system, the threaded joints must be
checked a few minutes after the machine is first used and tightened
if necessary. (Be careful not to overwind the threaded joints.)
Drainage
• The flexible drain hose with an inner diameter of 22 mm is to be laid
with no kinks.
• The appliance can also be installed above the level of the sink spigot.
A return inhibitor is integrated into the machine's drainage and
therefore connection fittings with non-return valves are not neces-
sary.
• The preferred connection is via the spigot of the sink outlet in the
unit next to the machine.
• The highest point of the drain hose is not to be more than 500 mm
above the floor of the appliance.
38