Brother DCP-117C Manual de início rápido - Página 20
Procurar online ou descarregar pdf Manual de início rápido para Impressora tudo em um Brother DCP-117C. Brother DCP-117C 33 páginas. Brother dcp-115c: quick start
Também para Brother DCP-117C: Manual de configuração rápida (40 páginas)
Imprimir página
STEP2
Installing the Driver & Software
For USB Interface Users
For Mac OS
Important
Make sure that you have finished the
instructions from Step 1 Setting Up the
Machine on page 4-9.
Note
For Mac OS
®
Mac OS
X 10.2.4 or greater. (For the latest
information for Mac OS
http://solutions.brother.com)
1
Disconnect the machine from the power socket
and from your computer, if you already
connected an interface cable.
2
Turn on your Macintosh
3
Put the supplied CD-ROM into your CD-ROM
drive.
4
Double-click the Start Here OSX icon to install
the drivers and MFL-Pro Suite. If the language
screen appears, choose your language.
5
Click MFL-Pro Suite to install.
18
®
X 10.2.4 or greater
®
X 10.2.0 to 10.2.3 users, upgrade to
®
X, visit
®
.
6
Follow the on-screen instructions, and restart
®
your Macintosh
.
7
Lift the scanner cover to its open position.
8
After the DeviceSelector window appears
connect the USB interface cable to your
Macintosh and then to the machine.
Note
The DeviceSelector window will not appear if you
have connected a USB interface cable to the
machine before restarting your Macintosh
you are overwriting a previously installed version
of the Brother Software. If you encounter this
problem continue with the installation but skip 13.
You should choose your Brother machine from the
Model pop-up menu in the main screen of
ControlCenter2. For details, see the Software
User's Guide on CD-ROM.
9
Connect the USB cable to the USB socket
marked with a
USB socket above and to the left of the ink
cartridge slots, as shown below.
®
Macintosh
®
or if
symbol. You will find the