AEG OKO FAVORIT 40660 i Instruções para o utilizador - Página 39

Procurar online ou descarregar pdf Instruções para o utilizador para Máquina de lavar loiça AEG OKO FAVORIT 40660 i. AEG OKO FAVORIT 40660 i 44 páginas. Aeg dishwasher
Também para AEG OKO FAVORIT 40660 i: Informações do utilizador (44 páginas), Instruções para o utilizador (40 páginas), Instruções para o utilizador (44 páginas), Instruções para o utilizador (48 páginas)

Water drain

Drain hose

The drain hose must not be kinked, crushed or entangled.

• Connecting the drain hose:

– Maximum permitted height: 1 metre.

– Minimum required height 40 cm above the lower edge of the machine.

Extension hoses

• Extension hoses are available from

AEG Service Force. The internal

diameter of the extension hoses

must be 19 mm to ensure that the

function of the appliance is not

impeded.

• Hoses may be laid a maximum of

3 metres horizontally; the maximum

permitted height for the connection

for the drain hose is then 85 cm.

Sink outlet connection

• The outlet of the drain hose (ø 19 mm) fits all commonly available

sink outlet spigot types. The outer diameter of the spigot connection

must be at least 15 mm.

• The drain hose must be fixed to the sink outlet connection using the

hose clamp supplied.

If the dishwasher is fitted at a high position

If the dishwasher is installed at a high level, and the drainhose connec-

tion is less than 30 cm from the bottom of the appliance, adapter kit ET

111099520 must be fitted. This is available from Customer Service.

Discharging into a standpipe

When discharging into a standpipe,

the upright standpipe should have a

minimum, length of 30 cm (12") from

the bottom of the elbow to the top

of the pipe (see diagram). Make sure

that it is designed in such a way that

the end of the drain hose cannot be

covered with water.

Installation and Connection Instructions