AEG OKO FAVORIT 80850 i Instruções para o utilizador - Página 39
Procurar online ou descarregar pdf Instruções para o utilizador para Máquina de lavar loiça AEG OKO FAVORIT 80850 i. AEG OKO FAVORIT 80850 i 48 páginas. Electrolux user information dishwasher ko_favorit 80850
Também para AEG OKO FAVORIT 80850 i: Instruções para o utilizador (48 páginas), Instruções para o utilizador (44 páginas)
Imprimir página
Connecting the Dishwasher
Water Connection
The dishwasher is fitted with safety devices that prevent the return of
wash water into the drinking water system and comply with the appli-
cable plumbing regulations.
• The dishwasher should be connected to a cold water supply.
• The dishwasher should not be connected to a hot water supply.
Permitted water pressure
Lowest permitted water pressure:
1 bar (=10N/cm2 =100 kPa)
Highest permitted water pressure:
10 bar (=100 N/cm2 =1 MPa)
Connect the inlet hose
The water inlet hose must not be kinked, crushed or entangled when it
1
is being connected up.
Connect the threaded hose fitting (DIN 259) on the water inlet hose to
0
a tap with an external thread (¾ inch). Handtighten the threaded hose
fitting only.
• In order that access to the tap in the kitchen is not limited by the use
3
of the dishwasher, we recommend the installation of an additional
tap, or the fitting a two way adapter to the existing tap.
• If you need a longer water inlet hose contact your local AEG Service
Force Centre.
Installation and Connection Instructions
For a water pressure of less than 2 bar
please seek advice from AEG Service
Force.
In the case of a water pressure greater
than 10 bar, a pressure reduction valve
must be used (available from your
dealer).
39