Brother MFC-J4540DW Manual de configuração rápida - Página 2
Procurar online ou descarregar pdf Manual de configuração rápida para Impressora tudo em um Brother MFC-J4540DW. Brother MFC-J4540DW 2 páginas.
Imprimir página
9
Machine settings
Follow the LCD instructions to configure
the machine settings.
• (MFC-J4540DW only) Configure the tray
setting.
• Check the software installation
information.
Connect your computer or mobile device to your machine
12
Follow these steps to complete the setup using one of the connection types available on your machine.
Visit
setup.brother.com
to download and install
Brother software.
setup.brother.com
Can't Connect? Check the following:
Wireless network
Wired network *
USB connection
* MFC-J4440DW / MFC-J4540DW only
Manual wireless setup
13
If the wireless setup is not successful, try to set up the connection manually.
Find your SSID (Network Name) and Network Key
(Password) on your wireless access point/router
and write them in the table provided below.
SSID (Network Name)
Network Key (Password)
SSID: XXXXXXX
Network key: XXXX
If you cannot find this information, ask your network
administrator or wireless access point/router
manufacturer.
For detailed machine information and product specifications, see the Online User's Guide at support.brother.com/manuals.
Select your language
10
(if needed)
MFC-J4340DW
1. Press Settings.
2. Press a or b to select the following:
a. Select [Initial Setup], and then press
OK.
b. Select [Local Language], and then press
OK.
c. Select your language, and then press OK.
3. Press Stop/Exit.
MFC-J4440DW / MFC-J4540DW
1. Press
[Settings] > [All Settings] >
[Initial Setup] > [Local Language].
2. Press your language.
3. Press
.
Follow the on-screen instructions and prompts.
NOTE
For Wired Network Connection (MFC-J4440DW / MFC-
J4540DW only) and USB Connection, locate the correct
port (based on the cable you are using) inside the
machine as shown.
Restart your wireless access point/
router (if possible).
Disconnect the cable.
MFC-J4340DW
1. Go to your machine, and press
on the panel.
2. Press OK to select
[Find Wi-Fi Network]. The
[Enable WLAN?] message
appears on the LCD.
3. Press c to select Yes.
MFC-J4440DW / MFC-J4540DW
Go to your machine, and press
[Find Wi-Fi Network] > [Yes].
11
Connect the telephone line cord
If you are not using your machine as a fax, go to
information on using the fax feature, see the Online User's
Guide.
(For Europe)
We can send you a genuine Brother cord free of charge if
you need one. To contact us, visit www.brother.eu.
Restart your machine and
12
computer, and then go to
.
Select the SSID (Network
Name) for your access point/
router and enter the Network Key
(Password).
When the wireless setup is
successful, the LCD displays
[Connected].
If setup is not successful, restart
your Brother machine and your
wireless access point/router, and
>
13
repeat
.
D01TTC001-00
(Example for UK)
Setup Finished
You can now print and scan using your machine.
To check for the latest firmware, visit
support.brother.com/up7.
Important Notice for Network Security:
The default password to manage this machine's
settings is located on the back of the machine
and marked "Pwd". We recommend immediately
changing the default password to protect your
machine from unauthorised access.
If still not successful, go to
13
.
If still not successful, visit
support.brother.com
for FAQs and Troubleshooting.
Go to
software.
© 2020 Brother Industries, Ltd. All rights reserved.
. For more
12
to install
12