Brother MFC-J5845DW Manual de configuração rápida
Procurar online ou descarregar pdf Manual de configuração rápida para Impressora tudo em um Brother MFC-J5845DW. Brother MFC-J5845DW 2 páginas. Brief explanations for routine operations
Também para Brother MFC-J5845DW: Manual de referência (32 páginas), Manual de Segurança do Produto (25 páginas), Manual de Segurança do Produto (25 páginas), Manual de configuração rápida (2 páginas), Manual de configuração rápida (2 páginas)
Imprimir página
MFC-J5845DW / MFC-J5945DW
Quick Setup Guide
Read the Product Safety Guide first, then read this Quick Setup Guide
for the correct installation procedure.
Unpack the machine and check the components
1
The components included in the box may differ depending on your country.
Remove the protective tape or film covering the machine.
Starter Ink Cartridges
• Black
• Yellow
• Cyan
• Magenta
Watch our FAQ Videos for help
with setting up your Brother
machine.
support.brother.com/videos
2
Load plain Letter/A4 paper
Pull the paper tray completely out of
the machine as shown by the arrow.
Take off the tray top cover.
Connect the
3
power cord
NOTE
You can adjust the control panel angle
to read the touchscreen more easily.
6
Machine settings
Follow the touchscreen instructions to configure the
machine settings:
• View operation tips
• Set Brother LCD Message defaults
• Check print quality
• Configure the tray or paper size settings
• Print the installation sheet
Select your language
8
(if needed)
1.
Press
[Settings] > [All Settings] >
[Initial Setup] > [Local Language].
2.
Press your language.
3.
Press
.
Quick Setup Guide
Product Safety Guide
Maintenance Sheet
Adjust the paper guides.
Fan the paper well.
Load the paper in the tray.
4
Install the starter ink cartridges
For MFC-J5845DW XL models: Insert the LC3039 Series Starter Ink Cartridges first.
Open the ink cartridge cover.
Connect the telephone line cord
7
If you are not using your machine as a fax, go to
For more information on using the fax feature, see the Online User's Guide.
Lift the scanner cover.
Select the correct
9
Receive Mode
If you are not using your machine as a fax, go to
1.
Press
[Settings] > [All Settings] >
[Fax] > [Setup Receive] > [Receive Mode].
2.
Press your preferred Receive Mode.
3.
Press
.
The latest manuals are available at the Brother Solutions Center:
support.brother.com/manuals
Brother Installation Disc
Telephone Line Cord
Do not exceed this
mark (bbb).
Put on the tray top cover, and
then slowly push the paper tray
completely into the machine.
Follow the touchscreen
instructions to unpack and install
the ink cartridges. Close the ink
cartridge cover. The machine will
prepare the ink tube system for
printing.
NOTE
The first time you install the ink
Quickly shake just the black
cartridges, the machine will use
extra ink to fill the ink delivery tubes.
ink cartridge horizontally
This is a one-time process that
15 times as shown, before
enables high-quality printing.
inserting it into the machine.
8
.
Connect the telephone line cord.
Use the jack marked LINE and guide
the cord out the back of the machine.
.
11
NOTE
Manuals in Spanish for these model are available at support.brother.com.
Manuales en Español para este modelo están disponibles en support.brother.com.
Most of the illustrations in this Quick Setup Guide show the MFC-J5945DW.
• Save all packing materials and the box in case you must ship your machine.
• You must purchase the correct interface cable for the interface you want to
use. A USB cable is included in some countries.
USB cable
Use a USB 2.0 cable (Type A/B) that is no more than 16 feet (5 meters) long.
Ethernet (Network) cable
Use a straight-through Category 5 (or greater) twisted-pair cable for 10BASE-T or
100BASE-TX Fast Ethernet Network.
Pull out the paper support
until it locks into place.
5
Follow the touchscreen instructions to
set the date and time.
Close the scanner cover.
10
Set your Station ID
If you are not using your machine as a fax, go to
Store your name and fax number so the machine prints it on all
outgoing fax pages.
1.
Press
[Settings] > [All Settings] >
[Initial Setup] > [Station ID] > [Fax].
2.
Enter your fax number (up to 20 digits) on the touchscreen,
and then press [OK].
3.
Press [Name].
4.
Enter your name (up to 20 characters) using the touchscreen,
and then press [OK].
5.
Press
.
D01D83001-01
USA/CAN
Version B
Set the date
and time
11
.