AEG 62 B4A 05 CA Manual do utilizador - Página 24
Procurar online ou descarregar pdf Manual do utilizador para Hob AEG 62 B4A 05 CA. AEG 62 B4A 05 CA 32 páginas.
Imprimir página
24
www.aeg.com
Problem
and a number come on.
You can hear a constant
beep noise.
12.2 If you cannot find a
solution...
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre. Give the
data from the rating plate. Make sure,
you operated the hob correctly. If not the
13. TECHNICAL DATA
13.1 Rating plate
Model IAE64851FB
Typ 62 B4A 05 CA
Induction 7.35 kW
Ser.Nr. .................
AEG
13.2 Software Licences
The software included in the hob
contains copyrighted software that is
licensed under the BSD, fontconfig, FTL,
Possible cause
FlexiBridge operates. One
or more sections of the func-
tion mode which operates
are not covered by the cook-
ware.
PowerSlide operates. Two
pots are placed on the flexi-
ble induction cooking area.
There is an error in the hob.
The electrical connection is
incorrect.
servicing by a service technician or
dealer will not be free of charge, also
during the warranty period. The
instructions about the Service Centre and
conditions of guarantee are in the
guarantee booklet.
PNC 949 597 568 00
220 - 240 V / 400 V 2N 50 - 60 Hz
Made in Germany
7.35 kW
GPL-2.0, LGPL-2.0, LGPL-2.1, libJpeg,
zLib/ libpng, MIT, OpenSSL / SSLEAY
ISC, Apache 2.0 and others.
Remedy
Place the cookware on the
correct number of sections
of the function mode which
operates or change the func-
tion mode. Refer to "Flexi-
ble induction cooking area".
Use only one pot. Refer to
"Flexible induction cooking
area".
Deactivate the hob and acti-
vate it again after 30 sec-
onds. If
comes on again,
disconnect the hob from the
electrical supply. After 30
seconds, connect the hob
again. If the problem contin-
ues, speak to an Authorised
Service Centre.
Disconnect the hob from the
electrical supply. Ask a quali-
fied electrician to check the
installation.