Brother MFC-L8650CDW Manual de configuração rápida
Procurar online ou descarregar pdf Manual de configuração rápida para Impressora tudo em um Brother MFC-L8650CDW. Brother MFC-L8650CDW 2 páginas. How to replace the drum unit
Também para Brother MFC-L8650CDW: Manual de Segurança do Produto (28 páginas), Manual (13 páginas), Manual de início rápido (7 páginas), Manual de configuração rápida (2 páginas)
Imprimir página
DCP-L8400CDN / DCP-L8450CDW
MFC-L8650CDW / MFC-L8850CDW / MFC-L9550CDW
Quick Setup Guide
Unpack the machine and check the components
Drum Unit
(pre-installed)
Toner Cartridges
(Black, Cyan, Magenta and Yellow;
pre-installed)
1
Remove the packing material from the machine
1
2
2
Load paper in the paper tray
3
Connect the power cord and turn on the machine
4
Select your language (for DCP models)
1.
After turning on the machine, the Touchscreen displays the list of languages you can
select.
Swipe up or down, or press a or b to display your language, and press your language.
Press OK.
2.
The Touchscreen prompts you to confirm your selection.
If the Touchscreen shows the correct language, press Yes.
—OR—
Press No to go back to step 1 to choose the language again.
(For U.K.)
Waste Toner Box
Telephone Line Cord
(pre-installed)
For MFC models
Belt Unit
Power Cord
(pre-installed)
3
4
The latest manuals are available at Brother Solutions Center:
http://solutions.brother.com/.
Not all models are available in all countries.
Quick Setup Guide
(For Others)
Product Safety Guide
Basic User's Guide
For MFC models
CD-ROM
NOTE:
If you have set the wrong language, you can change the language from the
Touchscreen.
(
, All Settings, Initial Setup, Local Language)
Read the Product Safety Guide first, and then read this Quick Setup
Guide for the correct installation procedure.
NOTE:
•
The components included in the box and the AC power plug
connection may differ depending on your country.
•
The illustrations in this Quick Setup Guide are based on the
MFC-L8850CDW.
•
You must purchase the correct interface cable for the interface you
want to use:
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no
more than 6 feet (2 metres) long.
Network cable
Use a straight-through Category 5 (or greater) twisted-pair cable
for 10BASE-T or 100BASE-TX Fast Ethernet Network.
1
2
4
For DCP models c Go to step
5
For MFC models c Go to step
button on the
Version 0
UK/IRE
3