Brother 2460N - HL B/W Laser Printer Manual de configuração rápida - Página 2
Procurar online ou descarregar pdf Manual de configuração rápida para Impressora Brother 2460N - HL B/W Laser Printer. Brother 2460N - HL B/W Laser Printer 2 páginas. Network quick setup guide - english
Também para Brother 2460N - HL B/W Laser Printer: Manual de configuração rápida de rede (2 páginas)
Imprimir página
Step 5 Print a test page.
ON OFF
Make sure that the printer power switch is off.
Plug the AC power cord into an AC
1
2
Connect the AC power cord to the printer.
outlet.
Do NOT connect the interface cable.
Turn the power switch on.
Parallel
For
interface cable users (For
Step 6 Connect the printer to your PC & Install the printer driver.
1
Click "Connect the interface cable and
2
Select the parallel interface
install the printer driver / utilities."
cable.
USB
For
interface cable users (For
Step 6 Install the driver & Connect the printer to your PC.
Note: When "Add New Hardware Wizard"
Click "Connect the interface cable
1
appears on your PC, click the Cancel
and install the printer driver /
button.
utilities."
Note: Install the driver before you connect
the USB interface cable to the printer. If you
have already connected it, remove it.
Click the OK button.
Make sure the printer power switch is on.
4
5
Step 7
Set up your PC printer port.
(For Windows
2000 users only)
®
1
After your PC has restarted, click Start,
2
Select the Brother HL-2460 series
Setting and Printers.
(copy2) icon.
Unfold the tray
extension flap
REDAY
Data
Back
Reprint
Set
Job cancel
Go
ON OFF
After the printer has finished warming up, the
3
READY message appears.
Windows
®
users only)
ON OFF
3
Turn the printer power switch off.
4
Connect the interface cable to your PC, and
then connect it to the printer.
Windows
®
users only)
Select the USB cable.
Click the Next button.
2
3
Follow the on-screen
instructions.
ON OFF
Connect the USB interface cable to your PC, and then connect
6
it to the printer.
®
For Windows
98/Me users: The setup is now complete.
®
For Windows
2000 users: Go to Step 7.
3
Click the File menu, and then select Set as Default printer.
The setup is now complete.
PRINTING
Data
Back
Note: When you are ready to set
Reprint
Set
the Control Panel message
Job cancel
Go
language, refer to the Control
Panel section at the bottom of
this sheet.
Press the Go switch. The printer prints a test page.
4
Check that the test page has printed correctly.
ON OFF
Turn the printer power
5
switch on.
Macintosh
®
For
If you print from a Macintosh computer, you will have to connect it to the printer via a Network
(Brother recommends using the NC-4100h network board).
Network
For
users
If you want to connect your printer using a Network cable, refer to the Quick Network Setup Guide.
After the administrator has made the required settings, install the driver referring to the "Installing the
Driver for Network users" section of the Quick Network Setup Guide.
Control Panel
Data
Back
Reprint
Set
Job cancel
Go
For more information, see "CONTROL
PANEL" in Chapter 3 of the User's Guide on
the supplied CD-ROM.
Follow the instructions for your interface cable
and operating system.
Note: If "Add New Hardware Wizard"
6
Click the Next button.
appears, click the Cancel button.
users
Data LED : Orange
On
Data remains in the printer buffer.
Blinking
Receiving or processing data.
Off
No remaining data.
Switches
Go
Exit from the control panel menu, reprint settings and clear error messages.
Pause / Continue printing.
Job Cancel
Stop and cancel the printer operation in progress.
Reprint
Select the reprint menu.
Move forward and backward through menus.
Move forward and backward through menus.
Menu
Set
Select the control panel menu.
Set the selected menus and the settings.
Back
Go back one level in the menu structure.
Language Setting (Default is English)
+
1. Select the SETUP mode by pressing the
switch, and then press the Set switch.
2. Check that the LANGUAGE message appears, and then press the Set switch.
+
-
3. Choose your language by pressing the
or
switch, and then press the Set switch. An asterisk mark (
the end of the display.
(You can return to the READY status by pressing the Go switch.)
Note
1. A real time clock is built into this printer. Set the time referring to Chapter 3 of the User's Guide on the CD-ROM.
You need to set the time before you can use the log management and reprint functions.
2. Please enhance the RAMDISK size when you want to use the reprint functions without the optional HDD or
CompactFlash.
See RAM expansion in Chapter 4 of the User's Guide.
Click the Finish button.
7
The setup is now complete.
) appears at
*