AEG 66201 KF-N Manual de instruções de instalação e funcionamento - Página 21

Procurar online ou descarregar pdf Manual de instruções de instalação e funcionamento para Hob AEG 66201 KF-N. AEG 66201 KF-N 36 páginas. Aeg ceramic hob installation and operating instructions 66201 kf-n
Também para AEG 66201 KF-N: Brochura e especificações (12 páginas), Manual do utilizador (32 páginas), Manual de instruções de instalação e funcionamento (32 páginas)

2. While the control lamp is flashing rapidly, use the + or - timersetting

sensor panels to set the desired period of time for this cooking zone up

until the point where it automatically switches itself off (e.g.

15 minutes).

The safety cut-out function will be activated after several minutes

The control lamp will now flash more slowly and the remaining cooking

time will be shown in the display as it elapses. If the safety cut-out

function has been set for more than one cooking zone, the time dis-

played will be that for the cooking zone with the shortest period of

cooking time remaining. The control lamps for the other cooking zones

for which the safety cut-out function has been set will illuminate. To

display the remaining cooking time for any of these cooking zones, it

must be selected using the timer sensor panel, and the corresponding

control lamp will then flash rapidly.

To reset the remaining cooking time the desired cooking zone must be

selected using the timer sensor panel. The corresponding control lamp

will then flash more rapidly. The settings are reset using the + or -

timer setting sensor panels.

After the set period of cooking time has elapsed the cooking zone au-

tomatically switches itself off, an acoustic signal sounds for two min-

utes and the timer display flashes 00.

3. To switch off the signal, touch the timer sensor panel.

To make the setting more quickly, touch any of the + or - timer set-

ting sensor panels until the desired value is reached.

If the - timer setting sensor panel is actuated first, the time setting

will begin at 99 minutes, and if the + timer setting sensor panel is ac-

tuated first, the time setting will begin at 1 minute.