AEG 66300 K-IN Manual de instruções de instalação e funcionamento - Página 21
Procurar online ou descarregar pdf Manual de instruções de instalação e funcionamento para Hob AEG 66300 K-IN. AEG 66300 K-IN 31 páginas. Ceramic glass hob
Também para AEG 66300 K-IN: Manual de instruções de instalação e funcionamento (40 páginas)
Imprimir página
Problem
The automatic warm up
function is not switching
itself on
Acoustic signal sounds and
appliance switches itself on
and then off again; after 5
seconds another acoustic
signal sounds
_ is lit
e
and number are dis-
played
e
and minus are displayed Light rays that are too
If you are unable to remedy the problem by following the above
suggestions, please contact your dealer or the Customer Care De-
partment.
1
Warning! Repairs to the appliance are only to be carried out by quali-
fied service engineers. Considerable danger to the user may result from
improper repairs.
3
If the appliance has been wrongly operated, the visit from the customer
service technician or dealer may not take place free of charge, even
during the warranty period.
Possible cause
There is still residual heat
on the cooking zone h
The highest heat setting is
set Ç
The heat setting was set
using the sensor field
The On/Off sensor field has
been covered up, e.g. by a
cloth
Overheating protection for
the cooking zone has been
triggered
Electronics fault
strong on the control pan-
el, for example bright sun-
light
Remedy
Let the cooking zone cool
down
The highest heat setting
has the same power as the
automatic warm up func-
tion
1. Switching off the cook-
ing zone
2. Set the cooking zone us-
ing the sensor field
Do not place any objects
on the control panel
Switch off the cooking
zone. Switch the cooking
zone on again
Disconnect the appliance
from the electrical supply
for a few minutes (Take the
fuse out of the house's wir-
ing system)
If after switching on again,
e
is displayed again, call
the customer service de-
partment
Briefly shade the control
panel, for example with
the hand Acoustic signal
sounds, appliance switches
itself off Switch appliance
on (again)
21