AEG 67600KF Manual de instruções de instalação e funcionamento - Página 11
Procurar online ou descarregar pdf Manual de instruções de instalação e funcionamento para Hob AEG 67600KF. AEG 67600KF 40 páginas. Ceramic glass induction hob
Imprimir páginaThe following letters and functions are displayed only with the two in-
duction cooking zones.
1
f = Error display
flashes if the cooking zone is activated and
– no pan is on the cooking zone or
– unsuitable pots and pans are used
p = Power function
lights up when the Power function is activated.
The Power function supplies extra-high heating capacity. It can be acti-
vated for the front left cooking zone.
1
Cooking Zone Safety Cut-out
If one of the cooking zones is not switched off after a certain time or if
the heat setting is not changed, the corresponding cooking zone
switches itself off automatically.
h appears in the ring display for all rings that were switched on, and _
after they have cooled down.
The rings are switched off at:
• Heat setting
• Heat setting
• Heat setting
• Heat setting
3
If one or more cooking zones switch off before the times indicated see
section "What to do if ...".
Cancelling the Safety Cut-out
To cancel the activated safety cut-out the appliance must be switched
off and then on again using the ON/OFF I sensor field. After this the
cooking zones are again ready for use.
Switching Off for Other Reasons
Liquids that boil over onto the control panel cause all cooking zones to
switch off immediately.
If you place a wet cloth on the control panel it has the same effect. In
both cases the appliance has to be switched on again using the mains
switch I after removing the liquid or cloth.
1 - 2
after 6 hours
3 - 4
after 5 hours
5
after 4 hours
6 - 9
after 1.5 hours
11