Brother DCP-8150DN Manual de configuração rápida - Página 15
Procurar online ou descarregar pdf Manual de configuração rápida para Impressora Brother DCP-8150DN. Brother DCP-8150DN 23 páginas. Quick setup guide - english
Também para Brother DCP-8150DN: Manual (36 páginas), Manual do utilizador avançado (50 páginas), Manual da rede (29 páginas), Manual (27 páginas), Manual do utilizador (23 páginas), Manual de Segurança do Produto (23 páginas)
Imprimir página
Wired Network
c
Choose Wired Network Connection
(Ethernet) and then click Next.
Note
If you want to install the PS driver (BR-Script3
printer driver), choose Custom Install and then
follow the on-screen instructions.
d
When the Firewall/AntiVirus detected screen
appears, choose Change the Firewall port
settings to enable network connection and
continue with the installation.
(Recommended) and click Next.
If you are not using the Windows
the user's guide for your software for
information on how to add the following
network ports.
For network scanning, add UDP port 54925.
If you still have trouble with your network
connection, add UDP port 161 and 137.
e
The installation will automatically continue. The
installation screens appear one after another. If
prompted, follow any on-screen instructions.
Important
DO NOT cancel any of the screens during the
installation. It may take a few seconds for all
screens to appear.
Note
• If prompted, choose your machine from the list,
and then click Next.
• If your machine is not found over the network,
confirm your settings by following the on-screen
instructions.
• If there is more than one of the same model
connected on your network, the IP Address and
Node Name will be displayed to help you
identify the machine.
• You can find your machine's IP address and the
node name by printing out the Network
Configuration Report. See Print the Network
Configuration Report on page 19.
®
• For Windows Vista
and Windows
when the Windows Security screen appears,
click the check box and click Install to complete
the installation correctly.
f
g
13
a
• If an error message appears during the
software installation, run the Installation
Diagnostics located in
®
Firewall, see
Start/All Programs/Brother/DCP-XXXX LAN
(where DCP-XXXX is your model name).
• Depending on your security settings, a
Windows
window may appear when using the machine or
its software. Please allow or permit the window
to continue.
®
7 users,
Windows
When the On-Line Registration screen
appears, make your selection and follow the
on-screen instructions. Once you have
completed the registration process, click Next.
When the Setup Complete screen appears,
check the box of the action you want to
perform, and then click Next.
Finish and restart
Click Finish to restart your computer. After
restarting the computer, you must log on with
Administrator rights.
Note
®
Security or antivirus software
®
15