Brother DCP-9055CDN Manual de início rápido - Página 17
Procurar online ou descarregar pdf Manual de início rápido para Impressora Brother DCP-9055CDN. Brother DCP-9055CDN 21 páginas. Brother dcp9055cdn mfp user's guide
Também para Brother DCP-9055CDN: Brochura e especificações (4 páginas), Manual do utilizador (38 páginas)
Imprimir página
For Network Users
Web Based Management
(web browser)
The Brother print server is equipped with a web server
that allows you to monitor its status or change some
of its configuration settings, using HTTP (Hyper Text
Transfer Protocol).
Note
• The default User Name is 'admin' and the
default password is 'access'. You can use a
web browser to change this password.
• We recommend Microsoft
®
Explorer
6.0 (or greater) or Firefox 3.0 (or
®
greater) for Windows
greater) for Macintosh. Please also make sure
that JavaScript and cookies are always enabled
in whichever browser you use. To use a web
browser, you will need to know the IP address
of the print server. The IP address of the print
server is listed on the Network Configuration
List.
a
Open your browser.
b
Type http://machine_ip_address/ into
your browser (where machine_ip_address
is the IP address of the printer or the print
server name).
For example http://192.168.1.2/
See Web Based Management in the Network
User's Guide.
®
Internet
and Safari 3.0 (or
Print the Network Configuration
List
You can print the Network Configuration List to
confirm the current network settings.
a
Turn on the machine and wait until the machine
is in the Ready state.
b
Press Menu, 5, 5.
c
Press Mono Start or Colour Start.
The machine will print the current network
settings.
d
Press Stop/Exit.
Restore the network settings to
factory default
To restore all network settings of the internal
Print/Scan server to factory default, please follow the
steps below.
a
Make sure the machine is not operating, then
disconnect all the cables from the machine
(except the power cord).
b
Press Menu, 4, 0.
c
Press 1 to choose Reset.
d
Press 1 to choose Yes.
The machine will restart, re-connect cables
once this is complete.
17