Brother DCP-T310 Manual de referência - Página 12
Procurar online ou descarregar pdf Manual de referência para Impressora Brother DCP-T310. Brother DCP-T310 28 páginas.
Também para Brother DCP-T310: Manual de Segurança do Produto (24 páginas), Manual de configuração rápida (2 páginas), Manual de configuração rápida (2 páginas)
Imprimir página
5
Scan
Before Scanning
Before attempting to scan, confirm the
following:
• Make sure you have installed the Brother
software and drivers.
• Make sure the USB or network cable is
connected correctly, or that you are
connected to the network using your
wireless access point/router.
Scan from Your
Computer
There are several ways you can use your
computer to scan photos and documents on
your Brother machine. Use the software
applications provided by Brother, or use your
favourite scanning application.
For more detailed information, see the Online
User's Guide: Scan from Your Computer
®
(Windows
) or Scan from Your Computer
(Mac).
Scan Using the Scan
Button on the Machine
1
Load your document.
2
Press
(SCAN).
3
Press a or b to select the [Scan to
PC] option, and then press OK.
4
Press a or b to select the [File]
option, and then press OK.
5
If the machine is connected over the
network, press a or b to select the
computer where you want to send data,
and then press OK.
If the LCD prompts you to enter a PIN,
use the control panel to enter the four-
digit PIN for the computer, and then press
OK.
6
Do one of the following:
• To change the settings, press
Options or Copy / Scan Options,
and then go to the next step.
• To use the default settings, press
Mono Start or Colour Start.
- [Scan Type] depends on the default
settings. Pressing Mono Start or
Colour Start does not allow you to
change the settings.
- To use scan options, a computer with
either ControlCenter4 (Windows®) or
Brother iPrint&Scan (Mac) software
installed must be connected to the
machine.
7
The machine will prompt you to set each
of the following scan settings. Press a or
b to select the desired option, and then
press OK to proceed to the next scan
setting.
• [Scan Type]
• [Resolution]
• [File Type]
• [Document Size]
• [Remove Bkg Clr]
8
Press Mono Start or Colour Start.
[Scan Type] depends on the settings
you have selected. Pressing Mono Start
or Colour Start does not change the
settings.
11