Brother GTX Manual de referência do utilizador - Página 3
Procurar online ou descarregar pdf Manual de referência do utilizador para Impressora Brother GTX. Brother GTX 16 páginas. Step by step photo instructions
Também para Brother GTX: Manual de desembalagem (17 páginas), Montagem do suporte (5 páginas)
Imprimir página
HEAT PRESS SETTINGS for Pre-Treatment DRYING
Pre
Pre
Treatment
Treatment
1/2 distilled
1/2 distilled
water
water
Use a Silicon sheet on the heat press to cover the pre-treatment and clean the surface every 5 T-shirts
You can also use Parchment paper when curing the Pre-treatment in order to minimise the need to clean off
the covers and to avoid issues with fibers standing up on the garment
HEATPRESS & TUNNEL DRYER SETTINGS for INK CURING
HEATPRESS
Ink
Curing
TUNNEL DRYER
Ink
Ink
Curing
Curing
Check the Real Temperature with a Probe or with Strips to be sure that you are safe for washability
Watch the Video: Using and Storing the CR Holding Pin
The Brother GTX should ALWAYS be left with the Power ON
NEVER shut OFF the printer unless instructed to by the display panel. Power
is required to perform the white Ink recirculation from time to time.
NEVER POWER OFF THE PRINTER!
In the event that the power goes out
or your printer has an error during
printing, push the Carriage back all
the way to the left to dock it and use
the Fixing Pin to lock it in place.
35
35
Seconds
Seconds
35
35
Seconds
Seconds
3:30
3,30
Minutes
Minutes
180°C
180°C
180°C
180°C
160°C
160°C
320°F
VERY IMPORTANT
75 - 80
PSI
10 - 20
10 - 20
PSI
PSI
POWER
3