Brother GTX pro Bulk Manual de início rápido - Página 11
Procurar online ou descarregar pdf Manual de início rápido para Impressora Brother GTX pro Bulk. Brother GTX pro Bulk 20 páginas. Garment printer
Também para Brother GTX pro Bulk: Manual de configuração (44 páginas)
Imprimir página
ADJUSTING THE HEIGHT OF THE PLATEN
To ensure optimal print quality when a thicker textile is used, you need to adjust the platen's
height in relation to the thickness of the textile.
> Don't forget to adjust the platen lever to position A after printing on thicker material.
> Always tighten knob
> If you have to print above hem and seams, go for UNI-directional printing to keep quality.
Normal Detecting
Top Left: Obstacle Sensor
Bottom Left: EDP Sensor
DAILY MAINTENANCE: Nozzle Check
In order to check the status of the nozzles in the print heads, a Nozzle Check must be
performed for White and CMYK. This should be done every day to ensure optimal performance.
How to perform a CMYK Nozzle Check?
Always place the Platen at level A
Menu
Test Print
To adjust the platen height, loosen the Platen Fixing
Lever
(1)
Lever
(2)
Re-tighten the Platen Fixing Lever
with the new height. Smooth out all wrinkles on fabric
to be printed on. To check if new textile is not detected
by the sensor, push the double arrow platen feed
button and repeat the process if needed. If you need
the platen to go down further than the lowest setting,
remove 1 or 2 collars, loosen the knob
down the platen bearing by 1 or 2 steps. Reattach
everything and tighten the Platen Fixing Lever (1).
(3)
after changing position. Do not overtighten screw as it can become stripped.
"PLATEN TOO LOW" SENSORS
If error occurs, press okay. Prior to next print
Nozzle Check CMYK
and move the Platen Height Adjustment
to a lower position.
Excessive Dropping
Error Code: 2072
raise platen to optimal platen height.
pattern on a white paper sheet
(1)
if you are happy
(3)
and push
to print a color Nozzle Check
11