LG 20MN47A Manual do Proprietário - Página 7

Procurar online ou descarregar pdf Manual do Proprietário para Monitor LG 20MN47A. LG 20MN47A 25 páginas. Lcd screen with led backlights

Imprimir página

Mounting on a table

• Image shown may differ from your monitor.

1 Lift and tilt the monitor into its upright position on a table.

- Leave a 10 cm (minimum) space from the wall for proper

ventilation.

10 cm

2 Connect the AC-DC Adapter and Power Cord to a wall outlet.

CAUTION

• Do not place the monitor near or on sources of heat, as this may

result in fire or other damage.

• Please be sure to connect the monitor to the AC-DC power adapter

before connecting the monitor's power plug to a wall power

outlet.

Using the kensington security system

(*This feature may vary depending on models.)

• Image shown may differ from your monitor.

The Kensington security system connector is located at the rear of the

monitor. For more information of installation and using, refer to the

manual provided with the Kensington security system or visit http://

www.kensington.com. Connect the Kensington security system cable

between the monitor and a table.

NOTE

• The Kensington security system is optional. You can obtain

additional accessories from most electronics stores.

10 cm

Mounting on a wall

For proper ventilation, allow a clearance of 10 cm on each side and

from the wall. Detailed installation instructions are available from

your dealer, see the optional Tilt Wall Mounting Bracket Installation

and Setup Guide.

10 cm

If you intend to mount the monitor to a wall, attach Wall mounting

interface (optional parts) to the back of the monitor. When you install

the monitor using the wall mounting interface (optional parts),

attach it carefully so it will not drop.

1 If you use screw longer than standard, the monitor might be

damaged internally.

2 If you use improper screw, the product might be damaged and

drop from mounted position. In this case, LG Electronics is not

responsible for it.

20MN47A

21MN47A / 21LF430A

Model

22MN47A / 22LF430A

24MN47A / 24LF430A

Wall Mount

(A x B)

Standard screw

Number of screws

CAUTION

• Disconnect the power cord first, and then move or install the

monitor. Otherwise electric shock may occur.

• If you install the monitor on a ceiling or slanted wall, it may fall

and result in severe injury. Use an authorized LG wall mount and

contact the local dealer or qualified personnel.

• Do not over tighten the screws as this may cause damage to the

monitor and void your warranty.

• Use the screws and wall mounts that meet the VESA standard. Any

damages or injuries by misuse or using an improper accessory are

not covered by the manufacturer's warranty.

• Screw length from outer surface of back cover should be under

8mm.

10 cm

75 x 75

M4 x L10